Research article Special Issues

Morphology orientation of comb-like polymers with rigid backbones under the influence of shear fields

  • Received: 30 June 2017 Accepted: 24 August 2017 Published: 31 August 2017
  • The influence of shear fields on the packing behavior and morphology orientation are studied for two comb-like polymers viz. poly(1,4-phenylene-2,5-didecyloxy terephthalate) (PPDOT) and poly(2,5-didecyloxy-1,4-phenylenevinylene) (DOPPV) with different rigid backbones having C = 10 alkyl carbons per side chain. Crystallographic analysis based on X-ray diffractometry measurements shows that both PPDOT and DOPPV exhibit a long-range ordered layered structure with alternating main chains and alkyl nanodomains and can be characterized by an orthorhombic and monoclinic unit cell respectively. No measurable influence of processing on the unit cell of the individual polymers is observed comparing diffraction data on isotropic (powder) samples and extruded fibers. The main difference between the PPDOT and DOPPV is in the molecular orientation of the backbones in shear aligned fibers as observed from the 2D diffraction patterns. While, for PPDOT the polymer backbones align along the direction of extrusion (fiber axis), for DOPPV the backbones align perpendicular to the extrusion direction. A possible relation between differences in backbone orientation under influence of shear fields for DOPPV and PPDOT and differences in the packing state of the side chains, which are in a crystalline state for DOPPV but in a disordered state for PPDOT, is considered.

    Citation: Gaurav Gupta, Varun Danke, Tamoor Babur, Mario Beiner. Morphology orientation of comb-like polymers with rigid backbones under the influence of shear fields[J]. AIMS Materials Science, 2017, 4(4): 970-981. doi: 10.3934/matersci.2017.4.970

    Related Papers:

  • The influence of shear fields on the packing behavior and morphology orientation are studied for two comb-like polymers viz. poly(1,4-phenylene-2,5-didecyloxy terephthalate) (PPDOT) and poly(2,5-didecyloxy-1,4-phenylenevinylene) (DOPPV) with different rigid backbones having C = 10 alkyl carbons per side chain. Crystallographic analysis based on X-ray diffractometry measurements shows that both PPDOT and DOPPV exhibit a long-range ordered layered structure with alternating main chains and alkyl nanodomains and can be characterized by an orthorhombic and monoclinic unit cell respectively. No measurable influence of processing on the unit cell of the individual polymers is observed comparing diffraction data on isotropic (powder) samples and extruded fibers. The main difference between the PPDOT and DOPPV is in the molecular orientation of the backbones in shear aligned fibers as observed from the 2D diffraction patterns. While, for PPDOT the polymer backbones align along the direction of extrusion (fiber axis), for DOPPV the backbones align perpendicular to the extrusion direction. A possible relation between differences in backbone orientation under influence of shear fields for DOPPV and PPDOT and differences in the packing state of the side chains, which are in a crystalline state for DOPPV but in a disordered state for PPDOT, is considered.


    加载中
    [1] Heeger AJ (2001) Semiconducting and metallic polymers: The fourth generation of polymeric materials. J Phys Chem B 105: 8475–8491. doi: 10.1021/jp011611w
    [2] Ong BS, Wu YL, Liu P, et al. (2004) High-performance semiconducting polythiophenes for organic thin-film transistors. J Am Chem Soc 126: 3378–3379. doi: 10.1021/ja039772w
    [3] Blom PWM, Vissenberg MCJM (2000) Charge transport in poly(p-phenylene vinylene) lightemitting diodes. Mater Sci Eng R 27: 53–94. doi: 10.1016/S0927-796X(00)00009-7
    [4] Gallot B (1996) Comb like and block liquid crystalline polymers for biological applications. Prog Polym Sci 21: 1035–1088. doi: 10.1016/S0079-6700(96)00010-X
    [5] Jianquan T, Weiqu L, Honglei W, et al. (2016) Preparation and properties of UV-curable waterborne comb-like(meth)acrylate copolymers with long fluorinated side chains. Prog Org Coat 94: 62–72. doi: 10.1016/j.porgcoat.2016.01.027
    [6] Jackson WJ (1980) Liquid crystal polymers. IV. Liquid crystalline aromatic polyesters. Brit Poly J 12: 154–162.
    [7] Ballauf M (1989) Stiff-chain polymers-Structure, phase-behavior, and properties. Angew Chem Int Ed Engl 28: 253–267. doi: 10.1002/anie.198902533
    [8] Shi H, Zhao Y, Dong X (2013) Frustrated crystallization and hierarchical self-assembly behavior of comb-like polymers. Chem Soc Rev 42: 2075–2099. doi: 10.1039/C2CS35350D
    [9] Beiner M, Huth H (2003) Nanophase separation and hindered glass transition in side-chain polymers. Nat Mater 2: 595–599. doi: 10.1038/nmat966
    [10] Pankaj S, Beiner M (2010) Confined dynamics and crystallization in self-assembled alkyl nanodomains. J Phys Chem B 114: 15459–15465. doi: 10.1021/jp1072999
    [11] Zheng W, Levon K, Laakso J, et al. (1994) Characterization and solid-state properties of processable N-alkylated polyanilines in the neutral state. Macromolecules 27: 7754–7768. doi: 10.1021/ma00104a034
    [12] Watanabe J, Ono H, Uematsu I, et al. (1985) Thermotropic polypeptides. 2. Molecular packing and thermotropic behavior of poly(L-glutamates) with long n-alkyl side chain. Macromolecules 18: 2141–2148.
    [13] Gupta G, Danke V, Babur T, et al. (2017) Interrelations between side chain and main chain packing in different crystal modifications of alkoxylated polyesters. J Phys Chem B 121: 4583–4591. doi: 10.1021/acs.jpcb.7b00928
    [14] Sirringhaus H, Brown PJ, Friend RH, et al. (1999) Two-dimensional charge transport in selforganized, high-mobility conjugated polymers. Nature 401: 685–688. doi: 10.1038/44359
    [15] Gargi D, Kline RJ, DeLongchamp DM, et al. (2013) Charge transport in highly face-on poly(3-hexylthiophene) films. J Phys Chem C 117: 17421–17428. doi: 10.1021/jp4050644
    [16] Koynov K, Bahtiar A, Ahn T, et al. (2006) Molecular weight dependence of chain orientation and optical constants of thin films of the conjugated polymer MEH-PPV. Macromolecules 39: 8692–8698. doi: 10.1021/ma0611164
    [17] Hamaguchi M, Yoshino K (1995) Rubbing-induced molecular orientation and polarized electroluminescence in conjugated polymer. Jpn J Appl Phys 34: 712–715. doi: 10.1143/JJAP.34.712
    [18] Okuzaki H, Hirata Y, Kunugi T (1999) Mechanical properties and structure of zone-drawn poly(pphenylene vinylene) films. Polymer 40: 2625–2629. doi: 10.1016/S0032-3861(98)00511-4
    [19] Lin NT, Satyanarayana K, Chen CH, et al. (2014) Controlling the orientation of pendants in twodimensional comb-like polymers by varying stiffness of polymeric backbones. Macromolecules 47: 6166–6172. doi: 10.1021/ma5007655
    [20] Jeng U, Hsu CH, Sheu HS, et al. (2005) Morphology and charge transport in poly(2-methoxy-5-(2'-ethylhexyloxy)-1,4-phenylenevinylene) films. Macromolecules 38: 6566–6574. doi: 10.1021/ma050367u
    [21] Singh CR, Gupta G, Lohwasser R, et al. (2013) Correlation of charge transport with structural order in highly ordered melt crystallized P3HT films. J Polym Sci Part B Polym Phys 51: 943–951. doi: 10.1002/polb.23297
    [22] Brinkmann M, Contal C, Kayunkid N, et al. (2010) Highly oriented and nanotextured films of regioregular poly(3-hexylthiophene) grown by epitaxy on the nanostructured surface of an aromatic substrate. Macromolecules 43: 7604–7610. doi: 10.1021/ma101313m
    [23] Kim JS, Park Y, Lee DY, et al. (2010) Poly(3-hexylthiophene) nanorods with aligned chain orientation for organic photovoltaics. Adv Funct Mater 20: 540–545. doi: 10.1002/adfm.200901760
    [24] Fischer FSU, Tremel K, Sommer M, et al. (2012) Directed crystallization of poly(3-hexylthiophene) in micrometre channels under confinement and in electric fields. Nanoscale 4: 2138–2144. doi: 10.1039/c2nr12037b
    [25] Ebert F, Thurn-Albrecht T (2003) Controlling the orientation of semicrystalline polymers by crystallization in magnetic fields. Macromolecules 36: 8685–8694. doi: 10.1021/ma034760g
    [26] Freidzon YAS, Talroze RV, Boiko NI, et al. (1988) Thermotropic liquid-crystalline polymers XXIII. Peculiarities of uniaxial orientation of comb-like liquid-crystalline polymers under mechanical stress. Liq Cryst 3: 127–132.
    [27] Nagamatsu S, Takashima W, Kaneto K (2003) Backbone arrangement in friction-transferred regioregular poly(3-alkylthiophene)s. Macromolecules 36: 5252–5257. doi: 10.1021/ma025887t
    [28] Hamidi-Sakr A, Biniek L, Fall S, et al. (2016) Precise control of lamellar thickness in highly oriented regioregular poly(3-hexylthiophene) thin films prepared by high-temperature rubbing: Correlations with optical properties and charge transport. Adv Funct Mater 26: 408–420. doi: 10.1002/adfm.201504096
    [29] Rim YS, Bae SH, Chen HJ, et al. (2016) Recent progress in materials and devices toward Printable and flexible sensors. Adv Mater 28: 4415–4440. doi: 10.1002/adma.201505118
    [30] Reinspach JA, Diao Y, Giri G, et al. (2016) Tuning the morphology of solution-sheared P3HT:PCBM films. ACS Appl Mater Interfaces 8: 1742–1751. doi: 10.1021/acsami.5b09349
    [31] Rauwendaal C (2001) Polymer Extrusion, Carl Hanser Verlag Munich.
    [32] Damman SB, Vroege GJ (1993) Liquid-crystalline main-chain polymers with a poly(p-phenylene terephthalate) backbone. X-ray-diffraction of the polyester with dodecyloxy side-chains. Polymer 34: 2732–2739.
    [33] Babur T, Balko J, Budde H, et al. (2014) Confined relaxation dynamics in long range ordered polyesters with comb-like architecture. Polymer 55: 6844–6852. doi: 10.1016/j.polymer.2014.10.062
    [34] Babur T (2017) Structure and relaxation dynamics of comb-like polymers with rigid backbone [PhD Dissertation]. Martin Luther University Halle-Wittenberg.
    [35] Babur T, Gupta G, Beiner M (2016) About different packing states of alkyl groups in comb-like polymers with rigid backbones. Soft Matter 12: 8093–8097. doi: 10.1039/C6SM01812B
    [36] Nagamatsu S, Misaki M, Chikamatsu M, et al. (2007) Crystal structure of friction transferred poly(2,5-dioctyloxy-1,4-phenylenevinylene). J Phys Chem B 111: 4349–4354. doi: 10.1021/jp067555m
    [37] Balsara NP, Dai HJ (1996) A transition from shear-induced order to shear-induced disorder in block copolymers. J Chem Phys 105: 2942–2945. doi: 10.1063/1.472162
    [38] Vigild ME, Chu C, SugiyamaM(2001) Influence of shear on the alignment of a lamellae-forming pentablock Copolymer. Macromolecules 34: 951–964.
    [39] Damman SB, Mercx FPM (1993) About di erent packing states of alkyl groups in comb-like polymers with rigid backbones. J Polym Sci Part B Polym Phys 31: 1759–1767.
    [40] Falk U, Westermark B, Boeffel C, et al. (1987) NMR of stiff macromolecules with flexible side chains. Mol Cryst Liq Cryst 153: 199–206.
  • Reader Comments
  • © 2017 the Author(s), licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0)
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Metrics

Article views(4831) PDF downloads(969) Cited by(4)

Article outline

Figures and Tables

Figures(6)  /  Tables(1)

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return

Catalog