Research article Special Issues

Conjugated polymers as functional hole selective layers in efficient metal halide perovskite solar cells

  • Received: 30 June 2017 Accepted: 17 August 2017 Published: 29 August 2017
  • Interface engineering is still an open question to be solved in the emerging field of metal halide perovskite solar cells. Although impressive advances have been already made in controlling the composition and the quality of the active layer, stability issues of complete devices are limiting yet the forefront of a future next generation of printable photovoltaics. At this point, the choice of proper charge selective layers is essential to yield perovskite solar cells with an optimal compromise between efficiency and stability. Even though diverse n-type materials displaying outstanding properties have been recently proposed, the record performances are yet limited to the use of p-type small molecule compounds with low hole mobility in their pristine form. In here, conjugated polymers widely used in the field of polymer solar cells are integrated in perovskite devices to behave as the hole selective layers. Apart from offering suitable hole mobility and energy matching with the valence band of the perovskite material to enable efficient charge extraction, their behaviour as potential functional barrier to protect the underlying perovskite film in standard n-i-p architectures is also discussed. Future work focused on developing novel alternatives based on more stable and efficient conjugated polymers might pave the way for the large scale production of perovskite solar cells.

    Citation: Silvia Colodrero. Conjugated polymers as functional hole selective layers in efficient metal halide perovskite solar cells[J]. AIMS Materials Science, 2017, 4(4): 956-969. doi: 10.3934/matersci.2017.4.956

    Related Papers:

  • Interface engineering is still an open question to be solved in the emerging field of metal halide perovskite solar cells. Although impressive advances have been already made in controlling the composition and the quality of the active layer, stability issues of complete devices are limiting yet the forefront of a future next generation of printable photovoltaics. At this point, the choice of proper charge selective layers is essential to yield perovskite solar cells with an optimal compromise between efficiency and stability. Even though diverse n-type materials displaying outstanding properties have been recently proposed, the record performances are yet limited to the use of p-type small molecule compounds with low hole mobility in their pristine form. In here, conjugated polymers widely used in the field of polymer solar cells are integrated in perovskite devices to behave as the hole selective layers. Apart from offering suitable hole mobility and energy matching with the valence band of the perovskite material to enable efficient charge extraction, their behaviour as potential functional barrier to protect the underlying perovskite film in standard n-i-p architectures is also discussed. Future work focused on developing novel alternatives based on more stable and efficient conjugated polymers might pave the way for the large scale production of perovskite solar cells.


    加载中
    [1] Sum TC, Mathews N (2014) Advancements in perovskite solar cells: photophysics behind the photovoltaics. Energ Environ Sci 7: 2518–2534. doi: 10.1039/C4EE00673A
    [2] Stoumpos CC, Kanatzidis MG (2015) The renaissance of halide perovskites and their evolution as emerging semiconductors. Accounts Chem Res 48: 2791–2802. doi: 10.1021/acs.accounts.5b00229
    [3] Chen Q, De Marco N, Yang Y, et al. (2015) Under the spotlight: The organic-inorganic hybrid halide perovskite for optoelectronic applications. Nano Today 10: 355–396. doi: 10.1016/j.nantod.2015.04.009
    [4] Zhao Y, Zhu K (2016) Organic-inorganic hybrid lead halide perovskites for optoelectronic and electronic applications. Chem Soc Rev 45: 655–689. doi: 10.1039/C4CS00458B
    [5] Kojima A, Teshima K, Shirai Y, et al. (2009) Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. J Am Chem Soc 131: 6050–6051. doi: 10.1021/ja809598r
    [6] Kim HS, Lee CR, Im JH, et al. (2012) Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%. Sci Rep 2: 591. doi: 10.1038/srep00591
    [7] Lee MM, Teuscher J, Miyasaka T, et al. (2012) Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites. Science 338: 643–647. doi: 10.1126/science.1228604
    [8] Saliba M, Matsui T, Domanski K, et al. (2016) Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance. Science 354: 206–209. doi: 10.1126/science.aah5557
    [9] Green MA, Emery K, Hishikawa Y, et al. (2014) Solar cell efficiency tables (Version 45). Prog Photovolt Res Appl 23: 1–9.
    [10] Burschka J, Pellet N, Moon SJ, et al. (2013) Sequential deposition as a route to high-performance perovskite-sensitized solar cells. Nature 499: 316–319. doi: 10.1038/nature12340
    [11] Eperon GE, Burlakov VM, Docampo P, et al. (2014) Morphological control for high performance, solution-processed planar heterojunction perovskite solar cells. Adv Funct Mater 24: 151–157. doi: 10.1002/adfm.201302090
    [12] Liang PW, Liao CY, Chueh CC, et al. (2014) Additive enhanced crystallization of solution-processed perovskite for highly efficient planar-heterojunction solar cells. Adv Mater 26: 3748–3754. doi: 10.1002/adma.201400231
    [13] Xie FX, Zhang D, Su H, et al. (2015) Vacuum-assisted thermal annealing of CH3NH3PbI3 for highly stable and efficient perovskite solar cells. ACS Nano 9: 639–646. doi: 10.1021/nn505978r
    [14] Zuo L, Gu Z, Ye T, et al. (2015) Enhanced photovoltaic performance of CH3NH3PbI3 perovskite solar cells through interfacial engineering using self-assembling monolayer. J Am Chem Soc 137: 2674–2679. doi: 10.1021/ja512518r
    [15] Seo J, Noh JH, Seok Sl (2016) Rational strategies for efficient perovskite solar cells. Accounts Chem Res 49: 562–572. doi: 10.1021/acs.accounts.5b00444
    [16] Eperon GE, Stranks SD, Menelaou C, et al. (2014) Formamidinium lead trihalide: a broadly tunable perovskite for efficient planar heterojunction solar cells. Energ Environ Sci 7: 982–988. doi: 10.1039/c3ee43822h
    [17] Xiao Z, Dong Q, Bi C, et al. (2014) Solvent annealing of perovskite-induced crystal growth for photovoltaic-device efficiency enhancement. Adv Mater 26: 6503–6509. doi: 10.1002/adma.201401685
    [18] Long M, Zhang T, Xu W, et al. (2017) Large-grain formamidinium PbI3−xBrx for high-performance perovskite solar cells via intermediate halide exchange. Adv Energy Mater 7: 1601882. doi: 10.1002/aenm.201601882
    [19] Long M, Zhang T, Zhu H, et al. (2017) Textured CH3NH3PbI3 thin film with enhanced stability for high performance perovskite solar cells. Nano Energy 33: 485–496. doi: 10.1016/j.nanoen.2017.02.002
    [20] Williams ST, Rajagopal A, Chueh CC, et al. (2016) Current challenges and prospective research for upscaling hybrid perovskite photovoltaics. J Phys Chem Lett 7: 811–819. doi: 10.1021/acs.jpclett.5b02651
    [21] Stranks SD, Eperon GE, Grancini G, et al. (2013) Electron-hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber. Science 342: 341–344. doi: 10.1126/science.1243982
    [22] Xing G, Mathews N, Sun S, et al. (2013) Long-range balanced electron- and hole-transport lengths in organic-inorganic CH3NH3PbI3. Science 342: 344–347. doi: 10.1126/science.1243167
    [23] Shi D, Adinolfi V, Comin R, et al. (2015) Low trap-state density and long carrier diffusion in organolead trihalide perovskite single crystals. Science 347: 519–522. doi: 10.1126/science.aaa2725
    [24] De Quilettes DW, Vorpahl SM, Stranks SD, et al. (2015) Impact of microstructure on local carrier lifetime in perovskite solar cells. Science 348: 683–686. doi: 10.1126/science.aaa5333
    [25] Yang WS, Noh JH, Jeon NJ, et al. (2015) High-performance photovoltaic perovskite layers fabricated through intramolecular exchange. Science 348: 1234–1237. doi: 10.1126/science.aaa9272
    [26] Jeon NJ, Noh JH, Yang WS, et al. (2015) Compositional engineering of perovskite materials for high-performance solar cells. Nature 517: 476–480. doi: 10.1038/nature14133
    [27] Ke W, Fang G, Liu Q, et al. (2015) Low-temperature solution-processed tin oxide as an alternative electron transporting layer for efficient perovskite solar cells. J Am Chem Soc 137: 6730–6733. doi: 10.1021/jacs.5b01994
    [28] Anaraki EH, Kermanpur A, Steier L, et al. (2016) Highly efficient and stable planar perovskite solar cells by solution-processed tin oxide. Energ Environ Sci 9: 3128–3134. doi: 10.1039/C6EE02390H
    [29] Xu X, Zhang H, Shi J, et al. (2015) Highly efficient planar perovskite solar cells with a TiO2/ZnO electron transport bilayer. J Mater Chem A 3: 19288–19293. doi: 10.1039/C5TA04239A
    [30] Okamoto Y, Suzuki Y (2016) Mesoporous BaTiO3/TiO2 double layer for electron transport in perovskite solar cells. J Phys Chem C 120: 13995–14000. doi: 10.1021/acs.jpcc.6b04642
    [31] Nguyen WH, Bailie CD, Unger EL, et al. (2014) Enhancing the hole-conductivity of spiro-OMeTAD without oxygen or lithium salts by using spiro(TFSI)2 in perovskite and dye-sensitized solar cells. J Am Chem Soc 136: 10996–11001. doi: 10.1021/ja504539w
    [32] Kim HS, Seo JY, Park NG (2016) Impact of selective contacts on long-term stability of CH3NH3PbI3 perovskite solar cells. J Phys Chem C 120: 27840–27848. doi: 10.1021/acs.jpcc.6b09412
    [33] Liu Y, Chen Q, Duan HS, et al. (2015) A dopant-free organic hole transport material for efficient planar heterojunction perovskite solar cells. J Mater Chem A 3: 11940–11947. doi: 10.1039/C5TA02502H
    [34] Xu J, Voznyy O, Comin R, et al. (2016) Crosslinked remote-doped hole-extracting contacts enhance stability under accelerated lifetime testing in perovskite solar cells. Adv Mater 28: 2807–2815. doi: 10.1002/adma.201505630
    [35] Kim GW, Kang G, Kim J, et al. (2016) Dopant-free polymeric hole transport materials for highly efficient and stable perovskite solar cells. Energ Environ Sci 9: 2326–2333. doi: 10.1039/C6EE00709K
    [36] Habisreutinger SN, McMeekin DP, Snaith HJ, et al. (2016) Research Update: Strategies for improving the stability of perovskite solar cells. APL Mater 4: 091503. doi: 10.1063/1.4961210
    [37] Yang J, Siempelkamp BD, Liu D, et al. (2015) Investigation of CH3NH3PbI3 degradation rates and mechanisms in controlled humidity environments using in situ techniques. ACS Nano 9: 1955–1963. doi: 10.1021/nn506864k
    [38] Christians JA, Miranda Herrera PA, Kamat PV (2015) Transformation of the excited state and photovoltaic efficiency of CH3NH3PbI3 perovskite upon controlled exposure to humidified air. J Am Chem Soc 137: 1530–1538. doi: 10.1021/ja511132a
    [39] Leguy AMA, Hu Y, Campoy-Quiles M, et al. (2015) Reversible Hydration of CH3NH3PbI3 in Films, Single Crystals, and Solar Cells. Chem Mater 27: 3397–3407. doi: 10.1021/acs.chemmater.5b00660
    [40] Habisreutinger SN, Leijtens T, Eperon GE, et al. (2014) Carbon nanotube/polymer composites as a highly stable hole collection layer in perovskite solar cells. Nano Lett 14: 5561–5568. doi: 10.1021/nl501982b
    [41] Smith IC, Hoke ET, Solis-Ibarra D, et al. (2014) A layered hybrid perovskite solar-cell absorber with enhanced moisture stability. Angew Chem 126: 11414–11417. doi: 10.1002/ange.201406466
    [42] Leijtens T, Giovenzana T, Habisreutinger SN, et al. (2016) Hydrophobic organic hole transporters for improved moisture resistance in metal halide perovskite solar cells. ACS Appl Mater Interfaces 8: 5981–5989. doi: 10.1021/acsami.5b10093
    [43] Hwang I, Jeong I, Lee J, et al. (2015) Enhancing stability of perovskite solar cells to moisture by the facile hydrophobic passivation. ACS Appl Mater Interfaces 7: 17330–17336. doi: 10.1021/acsami.5b04490
    [44] Sirringhaus H, Tessler N, Friend RH (1998) Integrated optoelectronic devices based on conjugated polymers. Science 280: 1741–1744. doi: 10.1126/science.280.5370.1741
    [45] Pei Q, Yu G, Zhang C, et al. (1995) Polymer light-emitting electrochemical cells. Science 269: 1086–1088. doi: 10.1126/science.269.5227.1086
    [46] Yu G, Gao J, Hummelen JC, et al. (1995) Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor–acceptor heterojunctions. Science 270: 1789–1791. doi: 10.1126/science.270.5243.1789
    [47] Forrest SR (2004) The path to ubiquitous and low-cost organic electronic appliances on plastic. Nature 428: 911–918. doi: 10.1038/nature02498
    [48] Bi D, Yang L, Boschloo G, et al. (2013) Effect of different hole transport materials on recombination in CH3NH3PbI3 perovskite-sensitized mesoscopic solar cells. J Phys Chem Lett 4: 1532–1536. doi: 10.1021/jz400638x
    [49] Heo JH, Im SH, Noh JH, et al. (2013) Efficient inorganic-organic hybrid heterojunction solar cells containing perovskite compound and polymeric hole conductors. Nat Photonics 7: 486–491. doi: 10.1038/nphoton.2013.80
    [50] Kwon YS, Lim J, Yun HJ, et al. (2014) A diketopyrrolopyrrole-containing hole transporting conjugated polymer for use in efficient stable organic-inorganic hybrid solar cells based on a perovskite. Energ Environ Sci 7: 1454–1460. doi: 10.1039/c3ee44174a
    [51] Zhu Z, Bai Y, Lee HK, et al. (2014) Polyfluorene derivatives are high-performance organic hole-transporting materials for inorganic-organic hybrid perovskite solar cells. Adv Funct Mater 24: 7357–7365. doi: 10.1002/adfm.201401557
    [52] Kranthiraja K, Gunasekar K, Kim H, et al. (2017) High-performance long-term-stable dopant-free perovskite solar cells and additive-free organic solar cells by employing newly designed multirole π-conjugated polymers. Adv Mater 29: 1700183. doi: 10.1002/adma.201700183
    [53] Long M, Chen Z, Zhang T, et al. (2016) Ultrathin efficient perovskite solar cells employing a periodic structure of a composite hole conductor for elevated plasmonic light harvesting and hole collection. Nanoscale 8: 6290–6299. doi: 10.1039/C5NR05042A
    [54] He Z, Xiao B, Liu F, et al. (2015) Single-junction polymer solar cells with high efficiency and photovoltage. Nat Photonics 9: 174–179. doi: 10.1038/nphoton.2015.6
    [55] Chen D, Nakahara A, Wei D, et al. (2011) P3HT/PCBM bulk heterojunction organic photovoltaics: correlating efficiency and morphology. Nano Lett 11: 561–567. doi: 10.1021/nl103482n
    [56] Di Giacomo F, Razza S, Matteocci F, et al. (2014) High efficiency CH3NH3PbI(3−x)Clx, perovskite solar cells with poly(3-hexylthiophene) hole transport layer. J Power Sources 251: 152–156. doi: 10.1016/j.jpowsour.2013.11.053
    [57] Xiao JY, Shi JJ, Liu HB, et al. (2015) Efficient CH3NH3PbI3 perovskite solar cells based on graphdiyne (GD)-modified P3HT hole-transporting material. Adv Energy Mater 5: 1401943. doi: 10.1002/aenm.201401943
    [58] Guo YL, Liu C, Inoue K, et al. (2014) Enhancement in the efficiency of an organic-inorganic hybrid solar cell with a doped P3HT hole-transporting layer on a void-free perovskite active layer. J Mater Chem A 2: 13827–13830. doi: 10.1039/C4TA02976C
    [59] Zhao N, Osedach TP, Chang LY, et al. (2010) Colloidal PbS quantum dot solar cells with high fill factor. ACS Nano 4: 3743–3752. doi: 10.1021/nn100129j
    [60] Koster LJA, Mihailetchi VD, Ramaker R, et al. (2005) Light intensity dependence of open-circuit voltage of polymer: fullerene solar cells. Appl Phys Lett 86: 123509–123509. doi: 10.1063/1.1889240
    [61] Mandoc M, Kooistra F, Hummelen J, et al. (2007) Effect of traps on the performance of bulk heterojunction organic solar cells. Appl Phys Lett 91: 263505. doi: 10.1063/1.2821368
    [62] Wetzelaer GAH, Scheepers M, Sempere AM, et al. (2015) Trap-assisted non-radiative recombination in organic-inorganic perovskite solar cells. Adv Mater 27: 1837–1841. doi: 10.1002/adma.201405372
    [63] Sherkar TS, Momblona C, Gil-Escrig L, et al. (2017) Improving the performance of perovskite solar cells: insights from a validated device model. Adv Energy Mater 7: 1602432. doi: 10.1002/aenm.201602432
    [64] Sherkar TS, Momblona, C, Gil-Escrig L, et al. (2017) Recombination in perovskite solar cells: significance of grain boundaries, interface traps, and defect ions. ACS Energy Lett 2: 1214–1222. doi: 10.1021/acsenergylett.7b00236
  • Reader Comments
  • © 2017 the Author(s), licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0)
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Metrics

Article views(5685) PDF downloads(1291) Cited by(3)

Article outline

Figures and Tables

Figures(6)  /  Tables(1)

Other Articles By Authors

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return

Catalog