Export file:

Format

  • RIS(for EndNote,Reference Manager,ProCite)
  • BibTex
  • Text

Content

  • Citation Only
  • Citation and Abstract

Discrete population balance models of random agglomeration and cleavage in polymer pyrolysis

School of Chemical and Process Engineering, University of Leeds, Leeds LS2 9JT, United Kingdom

Topical Section: Theory, simulations and modeling of materials

The processes of random agglomeration and cleavage (both of which are important for the development of new models of polymer combustion, but are also applicable in a wide range of fields including atmospheric physics, radiation modelling and astrophysics) are analysed using population balance methods. The evolution of a discrete distribution of particles is considered within this framework, resulting in a set of ordinary differential equations for the individual particle concentrations. Exact solutions for these equations are derived, together with moment generating functions. Application of the discrete Laplace transform (analogous to the Z-transform) is found to be effective in these problems, providing both exact solutions for particle concentrations and moment generating functions. The combined agglomeration-cleavage problem is also considered. Unfortunately, it has been impossible to find an exact solution for the full problem, but a stable steady state has been identified and computed.
  Figure/Table
  Supplementary
  Article Metrics

References

1. Smoluchowski M (1916) Drei Vorträge über Diffusion, Brownsche Molekularbewegung und Koagulation von Kolloidteilchen. Phys Z 17: 557–585.

2. Solsvik J, Jakobsen HA (2015) The Foundation of the Population Balance Equation: A Review. J Disper Sci Technol 36: 510–520.    

3. Ramkrishna D, Singh MR (2014) Population Balance Modeling: Current Status and Future Prospects. Annu Rev Chem Biomol 5: 123–146.

4. Ramkrishna D (1985) The status of population balances. Rev Chem Eng 3: 49–95.

5. Ramkrishna D, Mahoney AW (2002) Population balance modeling. Promise for the future. Chem Eng Sci 57: 595–606.    

6. Sporleder F, Borka Z, Solsvik J, et al. (2012) On the population balance equation. Rev Chem Eng 28: 149–169.

7. Blum J (2006) Dust agglomeration. Adv Phys 55: 881–947.

8. Gillespie DT (1975) An exact method for numerically simulating the stochastic coalescence process in a cloud. J Atmos Sci 32: 1977–1989.    

9. Khalili S, Lin Y, Armaou A, et al. (2010) Constant Number Monte Carlo Simulation of Population Balances with Multiple Growth Mechanisms. AIChE J 56: 3137–3145.    

10. Lucchesi M, Abdelgadir A, Attili A, et al. (2017) Simulation and analysis of the soot particle size distribution in a turbulent nonpremixed flame. Combust Flame 178: 35–45.

11. Lehrle RS, Peakman RE, Robb JC (1982) Pyrolysis-gas-liquid-chromatography utilised for a kinetic study of the mechanisms of initiation and termination in the thermal degradation of polystyrene. Eur Polym J 18: 517–529.    

12. Lehrle RS, Atkinson D, Cook S, et al. (1993) Polymer degradation mechanisms: new approaches. Polym Degrad Stabil 42: 281–291.    

13. Holland BJ, Hay JN (2001) The kinetics and mechanisms of the thermal degradation of poly(methyl methacrylate) studied by thermal analysis-Fourier transform infrared spectroscopy. Polymer 42: 4825–4835.

14. Inaba A, Kashiwagi T (1986) A calculation of thermal degradation initiated by random scission. 1. Steady state radical concentration. Macromolecules 19: 2412–2419.

15. Inaba A, Kashiwagi T (1987) A calculation of thermal degradation initiated by random scission, unsteady radical concentration. Eur Polym J 23: 871–881.    

16. Yoon JS, Jin HJ, Chin IJ, et al. (1997) Theoretical prediction of weight loss and molecular weight during random chain scission degradation of polymers. Polymer 38: 3573–3579.    

17. McCoy BJ, Madras G (1998) Evolution to similarity solutions for fragmentation and aggregation. J Colloid Interf Sci 201: 200–209.    

18. McCoy BJ (1999) Distribution kinetics for temperature-programmed pyrolysis. Ind Eng Chem Res 38: 4531–4537.    

19. Kostoglou M (2000) Mathematical analysis of polymer degradation with end-chain scission. Chem Eng Sci 55: 2507–2513.    

20. McCoy BJ (2001) Polymer thermogravimetric analysis: effects of chain-end and reversible random scission. Chem Eng Sci 56: 1525–1529.    

21. McCoy BJ, Madras G (2001) Discrete and continuous models for polymerization and depolymerization. Chem Eng Sci 56: 2831–2836.    

22. Madras G, McCoy BJ (2002) Numerical and similarity solutions for reversible population balance equations with size-dependent rates. J Colloid Interf Sci 246: 356–365.    

23. Staggs JEJ (2002) Modelling random scission of linear polymers. Polym Degrad Stabil 76: 37–44.    

24. Staggs JEJ (2004) Modelling end-chain scission and recombination of linear polymers. Polym Degrad Stabil 85: 759–767.    

25. Staggs JEJ (2005) A continuous model for vaporisation of linear polymers by random scission and recombination. Fire Safety J 40: 610–627.    

26. Staggs JEJ (2006) Discrete bond-weighted random scission of linear polymers. Polymer 47: 897–906.    

27. Staggs JEJ (2009) Modeling Thermal Degradation of Polymers by Population Balance Methods, In: Wilkie CA, Morgan AB, Fire Retardancy of Polymeric Materials, 2 Eds., CRC Press.

28. Hazewinkel M (2001) Z-transform, Encyclopedia of Mathematics. Available from: http://www.encyclopediaofmath.org/index.php/Main_Page.

29. Hoel PG (1984) Introduction to mathematical statistics, New York: Wiley.

Copyright Info: © 2017, John E. J. Staggs, licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution Licese (http://creativecommons.org/licenses/by/4.0)

Download full text in PDF

Export Citation

Article outline

Show full outline
Copyright © AIMS Press All Rights Reserved