Research article Topical Sections

Electromagnetic interference shielding and thermal properties of non-covalently functionalized reduced graphene oxide/epoxy composites

  • Received: 07 November 2016 Accepted: 21 December 2016 Published: 27 December 2016
  • Graphene oxide (GO) was non-covalently functionalized using sulfanilic acid azocromotrop (SAC) followed by hydrazine reduction to achieve SAC functionalized reduced GO (SAC-rGO). Fourier transform infrared spectra analysis and electrical conductivity measurements confirmed the successful functionlization and reduction of GO. The electrical conductivity of ~515 S•m−1 for SAC-rGO was recorded. The non-covalently functionalized reduced GO was subsequently dispersed in epoxy matrix at the loading level of 0.3 to 0.5 wt% to investigate its electromagnetic interference (EMI) shielding properties. The morphological and structural characterization of the SAC-rGO/epoxy composites was carried out using X-ray diffraction and Transmission electron microscopy analysis, which revealed the good dispersion of SAC-rGO in the epoxy. The SAC-rGO/epoxy composites showed the EMI shielding of −22.6 dB at the loading of 0.5 wt% SAC-rGO. Dynamical mechanical properties of the composites were studied to establish the reinforcing competency of the SAC-rGO. The storage modulus of the composites was found to increase within the studied temperature. Thermal stability of pure epoxy and its composites were compared by selecting the temperatures at 10 and 50% weight loss, respectively.

    Citation: Suman Chhetri, Pranab Samanta, Naresh Chandra Murmu, Suneel Kumar Srivastava, Tapas Kuila. Electromagnetic interference shielding and thermal properties of non-covalently functionalized reduced graphene oxide/epoxy composites[J]. AIMS Materials Science, 2017, 4(1): 61-74. doi: 10.3934/matersci.2017.1.61

    Related Papers:

  • Graphene oxide (GO) was non-covalently functionalized using sulfanilic acid azocromotrop (SAC) followed by hydrazine reduction to achieve SAC functionalized reduced GO (SAC-rGO). Fourier transform infrared spectra analysis and electrical conductivity measurements confirmed the successful functionlization and reduction of GO. The electrical conductivity of ~515 S•m−1 for SAC-rGO was recorded. The non-covalently functionalized reduced GO was subsequently dispersed in epoxy matrix at the loading level of 0.3 to 0.5 wt% to investigate its electromagnetic interference (EMI) shielding properties. The morphological and structural characterization of the SAC-rGO/epoxy composites was carried out using X-ray diffraction and Transmission electron microscopy analysis, which revealed the good dispersion of SAC-rGO in the epoxy. The SAC-rGO/epoxy composites showed the EMI shielding of −22.6 dB at the loading of 0.5 wt% SAC-rGO. Dynamical mechanical properties of the composites were studied to establish the reinforcing competency of the SAC-rGO. The storage modulus of the composites was found to increase within the studied temperature. Thermal stability of pure epoxy and its composites were compared by selecting the temperatures at 10 and 50% weight loss, respectively.


    加载中
    [1] Panigrahi R, Srivastava SK (2015) Trapping of Microwave Radiation in Hollow Polypyrrole Microsphere through Enhanced Internal Reflection: A Novel Approach. Sci Rep 5: 7638. doi: 10.1038/srep07638
    [2] Kathirgamanathan P (1993) Novel cable shielding materials based on the impregnation of microporous membranes with inherently conducting polymers. Adv Mater 5: 281–283. doi: 10.1002/adma.19930050412
    [3] Li P, Du D, Guo L, et al. (2016) Stretchable and conductive polymer films for high-performance electromagnetic interference shielding. J Mater Chem C 4: 6525. doi: 10.1039/C6TC01619G
    [4] Chhetri S, Kuila T, Murmu NC (2016) Graphene Composites, In: Nazarpour S, Waite SR, Eds, Graphene Technology: From Laboratory to Fabrication, John Wiley & Sons, 63–102.
    [5] Chen Z, Xu C, Ma C, et al. (2013) Lightweight and Flexible Graphene Foam Composites for High-Performance Electromagnetic Interference Shielding. Adv Mater 25: 1296–1300. doi: 10.1002/adma.201204196
    [6] Li N, Huang Y, Du F, et al. (2006) Electromagnetic Interference (EMI) Shielding of Single-Walled Carbon Nanotube Epoxy Composites. Nano Lett 6: 1141–1145. doi: 10.1021/nl0602589
    [7] Yang S, Lozano K, Lomeli A, et al. (2005) Electromagnetic interference shielding effectiveness of carbon nanofiber/LCP composites. Compos Part A-Appl S 36: 691–697.
    [8] Farukh M, Dhawan R, Singh BP (2015) Sandwich composites of polyurethane reinforced with poly(3,4-ethylene dioxythiophene)-coated multiwalled carbon nanotubes with exceptional electromagnetic interference shielding properties. RSC Adv 5: 75229–75238. doi: 10.1039/C5RA14105B
    [9] Ling J, Zhai W, Feng W, et al. (2013) Facile Preparation of Lightweight Microcellular Polyetherimide/Graphene Composite Foams for Electromagnetic Interference Shielding. ACS Appl Mater Inter 5: 2677–2684. doi: 10.1021/am303289m
    [10] Chen Y, Zhang HB, Yang Y, et al. (2016) High-Performance Epoxy Nanocomposites Reinforced with Three-Dimensional Carbon Nanotube Sponge for Electromagnetic Interference Shielding. Adv Funct Mater 26: 447–455. doi: 10.1002/adfm.201503782
    [11] Maiti S, Shrivastava NK, Suin S, et al. (2013) Polystyrene/MWCNT/Graphite Nanoplate Nanocomposites: Efficient Electromagnetic Interference Shielding Material through Graphite Nanoplate–MWCNT–Graphite Nanoplate Networking. ACS Appl Mater Inter 5: 4712–4724. doi: 10.1021/am400658h
    [12] Liang J, Wang Y, Huang Y, et al. (2009) Electromagnetic interference shielding of graphene/epoxy composites. Carbon 47: 922–925. doi: 10.1016/j.carbon.2008.12.038
    [13] Singh BP, Choudhary V, Saini P, et al. (2012) Designing of epoxy composites reinforced with carbon nanotubes grown carbon fiber fabric for improved electromagnetic interference shielding. AIP Adv 2: 022151. doi: 10.1063/1.4730043
    [14] Lonkar SP, Deshmukh YS, Abdala AA, et al. (2015) Recent advances in chemical modifications of graphene. Nano Res 8: 1039–1074. doi: 10.1007/s12274-014-0622-9
    [15] Kuila T, Bose S, Mishra AK, et al. (2012) Chemical functionalization of graphene and its applications. Prog Mater Sci 57: 1061–1105. doi: 10.1016/j.pmatsci.2012.03.002
    [16] Jana M, Saha S, Khanra P, et al. (2015) Non-covalent functionalization of reduced graphene oxide using sulfanilic acid azocromotrop and its application as supercapacitor electrode material. J Mater Chem A 3: 7323–7331. doi: 10.1039/C4TA07009G
    [17] Du J, Cheng HM (2012) The fabrication, properties, and uses of graphene/polymer composites. Macromol Chem Phys 213: 1060−1077.
    [18] Liang J, Huang Y, Zhang L, et al. (2009) Molecular-Level Dispersion of Graphene into Poly(vinyl alcohol) and Effective Reinforcement of their Nanocomposites. Adv Funct Mater 19: 2297−2302.
    [19] Wang Y, Shi ZX, Fang JH, et al. (2011) Graphene oxide/polybenzimidazole composites fabricated by a solvent-exchange method. Carbon 49: 1199−1207.
    [20] Zaman I, Kuan HC, Meng QS, et al. (2012) A Facile Approach to Chemically Modified Graphene and its Polymer Nanocomposites. Adv Funct Mater 22: 2735−2743.
    [21] Zaman I, Kuan HC, Dai JF, et al. (2012) From carbon nanotubes and silicate layers to graphene platelets for polymer nanocomposites. Nanoscale 4: 4578−4586.
    [22] Tang LC, Wan YJ, Yan D, et al. (2013) The effect of graphene dispersion on the mechanical properties of graphene/epoxy composites. Carbon 60: 16–27. doi: 10.1016/j.carbon.2013.03.050
    [23] Verma P, Saini P, Malik RS, et al. (2015) Excellent electromagnetic interference shielding and mechanical properties of high loading carbon-nanotubes/polymer composites designed using melt recirculation equipped twin-screw extruder. Carbon 89: 308–317. doi: 10.1016/j.carbon.2015.03.063
    [24] Wang JC, Xiang CS, Liu Q, et al. (2008) Ordered Mesoporous Carbon/Fused Silica Composites. Adv Funct Mater 18: 2995–3002. doi: 10.1002/adfm.200701406
    [25] Zhang HB, Yan Q, Zheng WG, et al. (2011) Tough Graphene-Polymer Microcellular Foams for Electromagnetic Interference Shielding. ACS Appl Mater Inter 3: 918−924.
    [26] Fang M, Zhen Z, Li J, et al. (2010) Constructing hierarchically structured interphases for strong and tough epoxy nanocomposites by amine-rich graphene surfaces. J Mater Chem 20: 9635−9643.
    [27] Chhetri S, Samanta P, Murmu NC, et al. (2016) Effect of Dodecyal Amine Functionalized Graphene on the Mechanical and Thermal Properties of Epoxy-based Composites. Polym Eng Sci [In Press].
    [28] Jin FL, Ma CJ, Park SJ, et al. (2011) Thermal and mechanical interfacial properties of epoxy composites based on functionalized carbon nanotubes. Mater Sci Eng A 528: 8517−8522.
    [29] Yu G, Wu P (2014) Effect of chemically modified graphene oxide on the phase separation behaviour and properties of an epoxy/polyetherimide binary system. Polym Chem 5: 96−104.
  • Reader Comments
  • © 2017 the Author(s), licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0)
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Metrics

Article views(6385) PDF downloads(1416) Cited by(25)

Article outline

Figures and Tables

Figures(9)  /  Tables(1)

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return

Catalog