Export file:


  • RIS(for EndNote,Reference Manager,ProCite)
  • BibTex
  • Text


  • Citation Only
  • Citation and Abstract

Aluminium/iron reinforced polyfurfuryl alcohol resin as advanced biocomposites

Department of Biotechnology,Central University of South Bihar, Patna–800014, India

Topical Section: Advanced composites

Aluminium and iron are widely used in construction sectors for the preparation of advanced composites with epoxy resins as matrices. In recent times, there are several reports on the polymerization of polyfufuryl alcohol (PFA) a thermoset bioresins from furfuryl alcohol (FA). FA is obtained from waste of sugarcane bagasse. In this work, first the possibility of curing PFA from FA in the presence of aluminium or iron has been explored. Absorbance results from colorimeter/spectrophotometerindicated that the curing of FA to PFA in presence of aluminium started easily while in presence of iron the curing of FA to PFA could not start. Based on the above results, aluminium wire reinforced composites were successfully prepared with three different weight fractions (0.13, 0.09 and 0.07) of aluminium wire. The mechanical properties of these composites were determined theoretically and reported.
  Article Metrics


1. Njjuguma J, Pielichowski K, Alcock JR (2007) Epoxy-based fibre reinforced nanocomposites. Adv Eng Mater 9: 835–847.    

2. Klemm D, Heublein B, Fink HP, et al. (2005) Cellulose: fascinating biopolymer and sustainable raw material. Ang Chem Int Ed 44: 3358–3393.

3. Gandini A (2011) The irruption of polymers from renewable resources on the scene of macromolecular science and technology. Green Chem 13: 1061–1083.

4. Gandini A, Belgacem MN (1997) Furans in polymer chemistry. Prog Polym Sci 22: 1203–1379.

5. Gandini A (2008) Polymers from renewable resources: A challenge for the future of macromolecular materials. Macromolecules 41: 9491–9504.    

6. Wang H, Yao J (2006) Use of Poly(furfuryl alcohol) in the fabrication of nanostructured carbons and nanocomposites. Ind Eng Chem Res 45: 6393–6404.

7. Guigo N, Mija A, Vincent L, et al. (2010) Eco-friendly composite resins based on renewable biomass resources: Polyfurfuryl alcohol/lignin thermosets. Eur Polym J 46: 1016–1023.    

8. Kumar R, Anandjiwala RD (2011) Polyfurfuryl alcohol products. South Africa Patent Application ZA2011/01976.

9. Kumar R, Anandjiwala RD (2012) Process for preparing polyfurfuryl alcohol products. WIPO Patent Application WO/2012/123902.

10. Kumar R, Kumar R, Anandjiwala RD (2012) Biofilms from polyfurfuryl alcohol adsorbed on soy protein isolate. Plast Rubber Compos Macro Eng 41: 1–7.

11. Kumar R, Anandjiwala RD (2013) Compression moulded flax fabric reinforced polyfurfuryl alcohol bio-composites: Mechanical and thermal properties. J Therm Anal Calor 112: 755–760.

12. Liganiso LZ, Kumar R, Anandjiwala RD (2014) Effect of agave americana microfiber content on poly(furfuryl) alcohol (PFA) based composites. J Biobased Mater Bioe 8: 299–307.

13. Bello SA, Agunsoye JO, Hassan SB, et, al. (2015) Epoxy resin based composites, mechanical and tribological properties: A review. Tribol Ind 37: 500–524.

14. Grilli R, Abel ML, Baker MA, et al. (2011) The adsorption of an epoxy acrylate resin on aluminium alloy conversion coatings. Int J Adhes Adhes 31: 687–694.    

15. Kim HJ, Jung DH, Jung IH, et al. (2012) Enhancement of mechanical properties of aluminium/epoxy composites with silane functionalization of aluminium powder. Compos Part B Eng 43: 1743–1748.    

16. Semoto T, Tsuji Y, Yoshizawa K (2011) Molecular understanding of the adhesive force between a metal oxide surface and an epoxy resin. J Phys Chem C115: 11701–11708.

17. Segun MA, Modupe AO (2012) Tensile properties of iron ore tailings filled epoxy composites. W Indian J Eng 35: 51–59.

18. Makoto N (1994) Mechanism of adhesion of epoxy resin to steel surface. Nippon steel technical report No 63.

19. Drazic DM, Miskovic-Stankovic VB (1990) The effect of resin concentration and electrodeposition bath temperature on the corrosion behaviour of polymer coated steel. Pro Org Coat 18: 253–264.    

20. Available from: http://www.azom.com/article.aspx?ArticleID=2863

Copyright Info: © 2016, Rakesh Kumar, licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution Licese (http://creativecommons.org/licenses/by/4.0)

Download full text in PDF

Export Citation

Article outline

Show full outline
Copyright © AIMS Press All Rights Reserved