Research article Special Issues

North Sea as geo database

  • Received: 26 February 2019 Accepted: 03 April 2019 Published: 22 April 2019
  • A national database of detailed 2D data and 1D ground investigation data is being developed for the Dutch sector of the North Sea. The 2D data mostly comprise interpreted results of high-resolution seismic reflection surveys. The ground investigation data typically comprise cone penetration test (CPT) results, S-wave velocity derived from seismic downhole tests, soil sample descriptions, soil sample classifications and results of geotechnical laboratory tests. The availability of public-domain geodata is rapidly increasing, primarily because of a licensing approach in which the Dutch government provides geotechnical and geological data to tenderers for design and operation of wind farms. The increasing availability of geodata provides new interests and opportunities for the apportioning, development and maintenance of offshore and coastal facilities. This paper describes the contents of the geo database. In addition, it discusses opportunities for testing and validation of new methods for site investigation, as well as integration of geophysical data, CPT results and sample data for state-of-the-art mapping and ground modelling purposes.

    Citation: Joek Peuchen, Bart M.L. Meijninger, Daniël Brouwer. North Sea as geo database[J]. AIMS Geosciences, 2019, 5(2): 66-81. doi: 10.3934/geosci.2019.2.66

    Related Papers:

  • A national database of detailed 2D data and 1D ground investigation data is being developed for the Dutch sector of the North Sea. The 2D data mostly comprise interpreted results of high-resolution seismic reflection surveys. The ground investigation data typically comprise cone penetration test (CPT) results, S-wave velocity derived from seismic downhole tests, soil sample descriptions, soil sample classifications and results of geotechnical laboratory tests. The availability of public-domain geodata is rapidly increasing, primarily because of a licensing approach in which the Dutch government provides geotechnical and geological data to tenderers for design and operation of wind farms. The increasing availability of geodata provides new interests and opportunities for the apportioning, development and maintenance of offshore and coastal facilities. This paper describes the contents of the geo database. In addition, it discusses opportunities for testing and validation of new methods for site investigation, as well as integration of geophysical data, CPT results and sample data for state-of-the-art mapping and ground modelling purposes.


    加载中


    [1] North Sea Energy, North Sea energy atlas-story map, 2018. Available from: https://www.north-sea-energy.eu/atlas.html .
    [2] Nexstep National Platform For Re-Use & Decommissioning, Re-use & decommissioning report 2018, 2018. Available from: https://nexstep.nl/re-use-decommissioning-report-2018.
    [3] Noordzeeloket, Surface mineral extraction, 2018. Available from: https://www.noordzeeloket.nl/en/functions-and-use/artikel-baseline.
    [4] BZK Ministerie van Binnenlandse Zaken en Koninkrijk Relaties-Programmabureau BRO, Ketenontwerp BRO, De Basisregistratie Ondergrond nader verklaard, 2018. Available from: https://www.digitaleoverheid.nl/voorzieningen/gegevens/inhoud-basisregistraties/bro/.
    [5] Rijkswaterstaat, Data portal, 2018. Available from: https://geoservices.rijkswaterstaat.nl/apps/geonetwork/srv/dut/catalog.search#/home.
    [6] RVO Rijksdienst voor Ondernemend Nederland, Offshore wind energy, 2018. Available from: https://english.rvo.nl/subsidies-programmes/sde/offshore-wind-energy.
    [7] Laban C (1995) The Pleistocene Glaciations in the Dutch Sector of the North Sea: A Synthesis of Sedimentary and Seismic Data, University of Amsterdam.
    [8] De Gans W (2007) Quaternary. In Wong TE, Batjes DAJ, de Jager J, Eds., Geology of the Netherlands, Royal Netherlands Academy of Arts and Sciences, 173–195.
    [9] GDN (2018). Geological Overview Map of the Kingdom of the Netherlands 1:600,000 (centennial edition), Utrecht: TNO-Geological Survey of the Netherlands, 1 map sheet.
    [10] DINOloket Data and Information of the Dutch Subsurface, 2018. Available from: https://www.dinoloket.nl/.
    [11] NLOG information about oil, gas and geothermal energy exploration and production in the Netherlands and the Dutch sector of the North Sea continental shelf, 2018. Available from: https://www.nlog.nl/.
    [12] Stolk A, Laban C (2002) The Dutch Sector of the North Sea, a geological introduction. Hydro International, December.
    [13] Laban C, Geschiedenis geologisch kartering Noordzeebodem, 2011. Available from: http://www.historie-oceanografie.nl/hocdocs/methoden/geschiedenisgeologischekartering noordzeebodem.
    [14] Van der Meulen MJ, Doornenbal JC, Gunnink JL, et al. (2013) 3-D geology in a 2D country: perspectives for geological surveying in the Netherlands. Neth J Geosci 92: 217–241.
    [15] Dutch Soil Information System, 2018. Available from: https://www.wur.nl/en/Research-Results/Research-Institutes/Environmental-Research/Fac ilities-Products/Dutch-Soil-Information-System-SIS.htm.
    [16] INSPIRE Infrastructure for Spatial Information in Europe, 2018. Available from: https://inspire.ec.europa.eu/.
    [17] Carbon Trust, Blue pilot; a new joint industry project targeted at reducing the costs of offshore wind installation and reducing underwater noise during construction, 2018. Available from: https://www.carbontrust.com/offshore-wind/owa/demonstration/blue-pilot/.
    [18] Toodesh R, Verhagen S (2018) Adaptive, variable resolution grids for bathymetric applications using a quadtree approach. J Appl Geodesy 12: 311–322. doi: 10.1515/jag-2017-0043
    [19] Vardon PJ, Baltoukas D, Peuchen J (2018) Interpreting and validating the thermal cone penetration test (T-CPT). Géotechnique, 1–13.
    [20] Graaf van der SC, Natural neighbour kriging and its potential for quality mapping and grid design, TU Delft, 2016. Available from: http://resolver.tudelft.nl/uuid:631281d0-e77c-465b-9562-b7ce788dd9cc.
    [21] Minorenti V, Brouwer DRH, Van Kesteren W (2017) 3D ground model using geophysical and geotechnical data-a case study from the Netherlands. In Near Surface Geoscience 3–7 September, Malmö, Sweden, We 23 A08.
    [22] Sauvin G, Vanneste M, Madshus C (2018) High-resolution quantitative ground-model for shallow subsurface. In Near Surface Geoscience Conference & Exhibition 2018, 9–12 September 2018, Porto, Portugal, Mo3 ASM 03.
    [23] Van Maanen PP, Harting R, Schokker J, et al. (2018) Geological interpretation of cone penetration test data by artificial neural networks to model the subsurface of the Netherlands in 3D. Comput Geosci, In press.
    [24] Robertson PK (2009) Performance based earthquake design using the CPT. In Kokusho T, Tsukamoto Y , Yoshimine M, Eds., Performance-based design in Earthquake Geotechnical Engineering-from Case History to Practice: Proceedings of the International Conference on Performance-based design in Earthquake Geotechnical Engineering (IS-Tokyo 2009), 15–18 June 2009, Boca Raton: CRC Press, 3–20.
    [25] EMODnet, Data ingestion portal, 2018. Available from: https://www.emodnet-ingestion.eu.
  • Reader Comments
  • © 2019 the Author(s), licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0)
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Metrics

Article views(5105) PDF downloads(1022) Cited by(2)

Article outline

Figures and Tables

Figures(11)  /  Tables(1)

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return

Catalog