Research article

Effect of haunch on the stresses of box culvert

  • Received: 05 October 2019 Accepted: 19 January 2020 Published: 21 February 2020
  • Culverts are often required under earth embankment to allow for the crossing of a watercourse, like streams, to prevent the road embankment from obstructing the natural waterway. The opening of the culvert is determined based on the waterway required to accommodate the design flood, whereas the thickness of the culvert section is designed based on the loads applied to the culvert. From the previous literature review, it is noted that the effect of haunch on the stresses of the culvert was not studied. Therefore, this research focuses on the impact of using haunches on the economy of the culvert design. This paper studies some design parameters of box culverts, such as the thickness of the haunch, the coefficient of earth pressure, the thickness of box culvert, and depth of fill on the top slab. The objectives show the effect of haunch on the stresses of the box culvert. The study investigated the variation in stresses and the cost comparison made for different width of the box culvert. The percentage reduction in the cost of culvert based on the presence of haunch is presented. At last, several significant conclusions are given based on numerical results as the presence of haunch is the best solution for decreasing the values of stresses from the economic point of view.

    Citation: Osama S. Hussien. Effect of haunch on the stresses of box culvert[J]. AIMS Environmental Science, 2020, 7(1): 31-45. doi: 10.3934/environsci.2020003

    Related Papers:

  • Culverts are often required under earth embankment to allow for the crossing of a watercourse, like streams, to prevent the road embankment from obstructing the natural waterway. The opening of the culvert is determined based on the waterway required to accommodate the design flood, whereas the thickness of the culvert section is designed based on the loads applied to the culvert. From the previous literature review, it is noted that the effect of haunch on the stresses of the culvert was not studied. Therefore, this research focuses on the impact of using haunches on the economy of the culvert design. This paper studies some design parameters of box culverts, such as the thickness of the haunch, the coefficient of earth pressure, the thickness of box culvert, and depth of fill on the top slab. The objectives show the effect of haunch on the stresses of the box culvert. The study investigated the variation in stresses and the cost comparison made for different width of the box culvert. The percentage reduction in the cost of culvert based on the presence of haunch is presented. At last, several significant conclusions are given based on numerical results as the presence of haunch is the best solution for decreasing the values of stresses from the economic point of view.


    加载中


    [1] Sinha BN, Sharma RP (2009) RCC box culvert-methodology and designs including computer method. J Indian Roads Cong 555: 189-219.
    [2] Maximos H, Erdogmus E, Tadros MK (2010) Fatigue evaluation for reinforced concrete box culverts. ACI Struct J 107: 13-20.
    [3] Shreedhar S, Shreedhar R (2013) Design coefficients for single and two cell box culvert. Int J Civil Struct Eng 3: 475-494.
    [4] Chandrakant LA, Malgonda PV (2014) Finite element analysis of box culvert. Int J Advan Technol Eng Sci 2: 93-102.
    [5] Kalyanshetti MG, Gosavi SA (2014) Analysis of box culvert - cost optimization for different aspect ratios of cell. Int J Res Eng Technol 3: 508-514.
    [6] Kolate N, Mathew M, Mali S (2014) Analysis and Design of RCC Box Culvert. Int J Sci Eng Res 5: 36-40.
    [7] Sahu KK, Sharma S (2015) Comparison and Study of Different Aspect Ratio of Box Culvert. Int J Sci Res Dev 3: 167-175.
    [8] Kumar YV, Srinivas C (2015) Analysis and Design of Box Culvert by Using Computational Methods. Int J Eng Sci Res 5: 850-861.
    [9] Patel AD, Galatage AA (2016) Analysis of Box Culvert under Cushion Loading. Int Advan Res J Sci Eng Technol 3: 163-166.
    [10] Krishna SR, Rao ChH (2017) Study on Box Culvert Soil Interaction. Int J Civil Eng Technol 8: 734-738.
    [11] Saurav, Pandey I (2017) Economic Design of RCC Box Culvert through Comparative Study of Conventional and Finite Element Method. Int J Eng Technol 9: 1707-1713. doi: 10.21817/ijet/2017/v9i3/170903042
    [12] Polra AR, Chandresha SP, Parikh KBA (2017) Review Paper on Analysis and CostComparison of Box Culvert for the Different Aspect Ratio of Cell. Int J Eng Trends and Technol 44: 112-115. doi: 10.14445/22315381/IJETT-V44P223
    [13] Qiang Ma, Chaogang Huang, Henglin Xiao, et al. (2018) Embankment Filling Loads on an Assembled Concrete Culvert beneath High Embankment. Int J Corros ID 9870673.
    [14] Vasu Shekhar Tanwar, Verma MP, Sagar Jamle (2018) Analytic Study of Box Culvert to Reduce Bending Moment and Displacement Values. Int J Curr Eng Technol 8: 762-764.
    [15] Elie Awwad, Mounir Mabsout, Kassim Tarhini, et al. (2019) Wheel Load Distribution in FourSided Concrete Box Culverts. Athe J Technol Engin 6: 17-30.
    [16] Roshan Patel, Sagar Jamle (2019) Analysis and Design of Box Culvert: A Manual Approach. Intl J Advan Eng Res Sci 6: 286-291.
  • Reader Comments
  • © 2020 the Author(s), licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0)
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Metrics

Article views(4417) PDF downloads(501) Cited by(1)

Article outline

Figures and Tables

Figures(36)  /  Tables(9)

Other Articles By Authors

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return

Catalog