Research article Special Issues

Extrusion of Fe2O3/SBA-15 mesoporous material for application as heterogeneous Fenton-like catalyst

  • Received: 11 December 2014 Accepted: 23 February 2015 Published: 11 March 2015
  • The aim of this work has been the extrusion of powder Fe2O3/SBA-15 catalyst in order to be successfully used in continuous catalytic fixed bed reactors as Fenton-like catalyst. The extrusion method was optimised using an amorphous silica material of similar properties than the Fe2O3/SBA-15 catalyst. The main studied variable was the composition of the extrusion paste using bentonite and methylcellulose as inorganic and organic binders, respectively. The organic content displayed a significant influence on the mechanical strength and specific surface area of the final extrudates. In contrast, the inorganic binder content hardly affected the final properties (in the studied range). The extruded Fe2O3/SBA-15 material showed a remarkable mechanical strength as well as the typical mesoporous structure of Fe2O3/SBA-15 with a relevant specific surface area (264 m2/g). The extruded catalyst achieved a high catalytic performance in the catalytic wet peroxide oxidation of phenol with a 60 % of total organic carbon reduction in both batch and continuous processes.

    Citation: Isabel Pariente María, Martínez Fernando, ÁngelBotas Juan, AntonioMelero Juan. Extrusion of Fe2O3/SBA-15 mesoporous material for application as heterogeneous Fenton-like catalyst[J]. AIMS Environmental Science, 2015, 1(2): 154-168. doi: 10.3934/environsci.2015.2.154

    Related Papers:

  • The aim of this work has been the extrusion of powder Fe2O3/SBA-15 catalyst in order to be successfully used in continuous catalytic fixed bed reactors as Fenton-like catalyst. The extrusion method was optimised using an amorphous silica material of similar properties than the Fe2O3/SBA-15 catalyst. The main studied variable was the composition of the extrusion paste using bentonite and methylcellulose as inorganic and organic binders, respectively. The organic content displayed a significant influence on the mechanical strength and specific surface area of the final extrudates. In contrast, the inorganic binder content hardly affected the final properties (in the studied range). The extruded Fe2O3/SBA-15 material showed a remarkable mechanical strength as well as the typical mesoporous structure of Fe2O3/SBA-15 with a relevant specific surface area (264 m2/g). The extruded catalyst achieved a high catalytic performance in the catalytic wet peroxide oxidation of phenol with a 60 % of total organic carbon reduction in both batch and continuous processes.


    加载中
    [1] Gogate PR, Pandit AB (2004) A review of imperative technologies for wastewater treatment II: hybrid methods.Adv Environ Res 8: 553-597.
    [2] Garrido-Ramírez EG, Theng BKG, Mora ML (2010) Clays and oxide minerals as catalysts and nanocatalysts in Fenton-like reactions.Appl Clay Sci 47: 182-192.
    [3] Neyens E, Baeyens J (2003) A review of classic Fenton's peroxidation as an advanced oxidation technique.J Hazard Mater 98: 33-50.
    [4] Krüger RL, Dallago RM, Di Luccio M (2009) Degradation of dimethyl disulfide using homogeneous Fenton's reaction.J Hazard Mater 169: 443-447.
    [5] Babuponnusami A, Muthukumar K (2012) Advanced oxidation of phenol: A comparison between Fenton, electro-Fenton, sono-electro-Fenton and photo-electro-Fenton processes.Chem Eng J 183: 1-9.
    [6] Badawy MI, Gohary FEI, Ghaly MY, et al. (2009) Enhancement of olive mill wastewater biodegradation by homogeneous and heterogeneous photocatalytic oxidation.J Hazard Mater 169: 673-679.
    [7] Zhao D, Feng J, Huo Q, et al. (1998) Triblock copolymer syntheses of Mesoporous silica with periodic 50 to 300Angstrom pores.Science 279: 548-552.
    [8] Melero JA, Calleja G, Martínez F, et al. (2007) Nanocomposite Fe2O3/SBA-15: An efficient and stable catalyst for the catalytic wet peroxidation of phenolic aqueous solutions.Chem Eng J 131: 245-256.
    [9] Shukla P, Wang S, Sun H, et al. (2010) Adsorption and heterogeneous advanced oxidation of phenolic contaminants using Fe loaded mesoporous SBA-15 and H2O2.Chem Eng J 164: 255-260.
    [10] Melero JA, Martínez F, Botas JA, et al. (2009) Heterogeneous catalytic wet peroxide oxidation systems for the treatment of an industrial pharmaceutical wastewater.Water Res 43: 4010-4018.
    [11] Chandrasekar G, Hartmann M, Murugesan V (2009) Preparation of SBA-15 extrudates: Evaluation of textural and mechanical properties.J Porous Mater 16: 175-183.
    [12] Martínez F, Melero JA, Botas JA, et al. (2007) Treatment of Phenolic Effluents by Catalytic Wet Hydrogen Peroxide Oxidation over Fe2O3/SBA-15 Extruded Catalyst in a Fixed-Bed Reactor.Ind Eng Chem Res 46: 4396-4405.
    [13] Melero JA, Bautista LF, Iglesias J, et al. (2014) Production of biodiesel from waste cooking oil in a continuous packed bed reactor with an agglomerated Zr-SBA-15/bentonite catalyst.Appl Catal B: Environ 145: 197-204.
    [14] Melero JA, Iglesias J, Sainz-Pardo J, et al. (2008) Agglomeration of Ti-SBA-15 with clays for liquid phase olefin epoxidation in a continuous fixed bed reactor.Chem Eng J 139: 631-641.
    [15] González-Velasco JR, Gutiérrez-Ortiz MA, Ferret R, et al. (1999) Synthesis of cordierite monolithic honeycomb by solid state reaction of precursor oxides.J Mater Sci Lett 34: 1999-2002.
    [16] Brunauer S, Emmet PH, Teller E (1938) Adsorption of gases in multimolecular layers.J Am Chem Soc 60: 309-319.
    [17] Barret EP, Joyner LG, Halenda PP (1951) Determination of pore volume and area distributions in porous substances I. Computations from nitrogen isotherms.J Am Chem Soc 73: 373-380.
    [18] ASTM C1161-02 (2013) Standard test method for flexural strength of advanced ceramics at ambient temperature.ASTM International .
    [19] Marro FG, Mestra A, Anglada M (2014) Weibull strength statistics of hydrothermally aged 3 mol% yttria-stabilised tetragonal zirconia.Ceram Int 40: 12777-12782.
    [20] Benbow J, Jazayeri S, Bridgwater J (1988) Ceramic extrusion mechanics: the effects of paste formulation and liquid phase rheology on die-flow resistance.Ceram Powder Sci 1: 624-634.
    [21] Lee LY, Perera SP, Crittenden BD, et al. (2000) Manufacture and characterisation of silicalite monoliths.Adsorpt Sci Technol 18: 147-170.
    [22] Li YY, Perera SP, Crittenden BD, et al. (2001) The effect of the binder on the manufacture of a 5A zeolite monolith.Powder Technol 116: 85-96.
    [23] Müller SP, Kucher M, Ohlinger C, et al. (2003) Extrusion of Cu/ZnO catalysts for the single-stage gas-phase processing of dimethyl maleate to tetrahydrofuran.J Catal 218: 419-426.
    [24] Forzatti P, Ballardini D, Sighicelli L (1998) Preparation and characterization of extruded monolithic ceramic catalysts.Catal Today 41: 87-94.
    [25] Topka P, Karban J, Soukup K, et al. (2011) Preparation of Al-SBA-15 pellets with low amount of additives: Effect of binder content on texture and mechanical properties. Application to Friedel-Crafts alkylation.Chem Eng J 168: 433-440.
  • Reader Comments
  • © 2015 the Author(s), licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0)
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Metrics

Article views(5928) PDF downloads(1215) Cited by(8)

Article outline

Figures and Tables

Figures(8)  /  Tables(3)

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return

Catalog