Research article Topical Sections

Feasibility study of D-mannitol as phase change material for thermal storage

  • Received: 14 March 2017 Accepted: 03 May 2017 Published: 10 May 2017
  • The feasibility of D-mannitol as PCM for latent heat storage has been studied by keeping it melted at 180 ºC in air for up to 16 days. During this period of time, down to 80% initial mass was lost and sample appearance changed to a dark-brown-sticky paste. The strong mass decrease implies that not only water but also carbon containing volatile species are produced. These results indicate that D-mannitol undergoes thermal degradation which can be associated to caramelization processes similar to the ones occurring in sugars. Such processes involve complex reactions like dehydrations, condensations and polymerizations, which lead to a great variety of volatile and non-volatile products. Various characterization techniques have been applied in order to study both kinetics and reaction products. From the kinetic point of view thermal degradation of D-mannitol proceeds much faster and at lower temperatures than predicted by the models found in the literature. In relation to the degradation products, the analyses with liquid chromatography indicate the formation of three compounds although their stoichiometry could not be fully elucidated with the characterization techniques applied in this work. However it seems that some of the products are polymeric species that contain carbonyl groups and that are the responsible for the sample browning, the strong absorption in the 200 nm–500 nm range, the two bands at 1730 cm–1–1645 cm–1 observed in infrared spectra and also for the occurrence of a glass transition. Therefore this study proves that D-mannitol undergoes strong and fast degradation at temperatures close to its melting point which should be enough reason for avoiding its use as PCM in any latent heat storage application unless it is somehow stabilized.

    Citation: Rocío Bayón, Esther Rojas. Feasibility study of D-mannitol as phase change material for thermal storage[J]. AIMS Energy, 2017, 5(3): 404-424. doi: 10.3934/energy.2017.3.404

    Related Papers:

  • The feasibility of D-mannitol as PCM for latent heat storage has been studied by keeping it melted at 180 ºC in air for up to 16 days. During this period of time, down to 80% initial mass was lost and sample appearance changed to a dark-brown-sticky paste. The strong mass decrease implies that not only water but also carbon containing volatile species are produced. These results indicate that D-mannitol undergoes thermal degradation which can be associated to caramelization processes similar to the ones occurring in sugars. Such processes involve complex reactions like dehydrations, condensations and polymerizations, which lead to a great variety of volatile and non-volatile products. Various characterization techniques have been applied in order to study both kinetics and reaction products. From the kinetic point of view thermal degradation of D-mannitol proceeds much faster and at lower temperatures than predicted by the models found in the literature. In relation to the degradation products, the analyses with liquid chromatography indicate the formation of three compounds although their stoichiometry could not be fully elucidated with the characterization techniques applied in this work. However it seems that some of the products are polymeric species that contain carbonyl groups and that are the responsible for the sample browning, the strong absorption in the 200 nm–500 nm range, the two bands at 1730 cm–1–1645 cm–1 observed in infrared spectra and also for the occurrence of a glass transition. Therefore this study proves that D-mannitol undergoes strong and fast degradation at temperatures close to its melting point which should be enough reason for avoiding its use as PCM in any latent heat storage application unless it is somehow stabilized.


    加载中
    [1] Waschull J, Müller R, Römer S (2009) Investigation of phase change materials for elevated temperatures. Available from: http: //intraweb.stockton.edu/ eyos/energy_studies/ content/docs/ effstock09/posters/151.pdf.
    [2] Sharma SD, Sagara K (2005) Latent heat storage materials and systems: a review. Int J Green Energy 2: 1–56. doi: 10.1081/GE-200051299
    [3] Kumaresan G, Velraj R, Iniyan S (2001) Thermal analysis of D-mannitol for use as phase change material for latent heat storage. J Appl Sci 11: 3044–3048.
    [4] Lee JW, Thomas LC, Schmidt SJ (2011) Investigation of the heating rate dependency associated with the loss of crystalline structure in sucrose, glucose and fructose using a thermal analysis approach (Part I). J Agr Food Chem 59: 684–701. doi: 10.1021/jf1042344
    [5] Gallegos-Lazcano MA, Yu W (2014) Thermal performance and flammability of phase change material for medium and elevated temperatures for textile applications. J Therm AnalCalorim 117: 9–17. doi: 10.1007/s10973-013-3411-x
    [6] Ye P, Byron T (2008) Characterization of D-mannitol by thermal analysis, FTIR and Raman spectroscopy. Amer Lab 40: 24–27.
    [7] Burger A, Henck JO, Hetz S, et al. (2000) Energy/temperature diagram and compression behavior of the polymorphs of D-mannitol. J Pharm Sci 89: 457–468. doi: 10.1002/(SICI)1520-6017(200004)89:4<457::AID-JPS3>3.0.CO;2-G
    [8] Gombas A, Szabo-Revesz P, Regdon Jr G, et al. (2003). Study of thermal behaviour of sugar alcohols. J Therm Anal Calorim 73: 615–621. doi: 10.1023/A:1025490432142
    [9] Bruni G, Berbenni V, Milanese C, et al. (2009) Physico-chemical characterization of anhydrous D-mannitol. J Therm Anal Calorim 95: 871–876. doi: 10.1007/s10973-008-9384-5
    [10] Bayón R, Rojas E (2015) Characterization of organic PCMs for medium temperature storage. In: A Méndez-Vilas (Ed.), Materials and Technologies for Energy Efficiency, Brown Walker Press, Boca Ratón, Florida (US), 157–161.
    [11] Solé A, Neumann H, Niedermaier S, et al. (2014) Stability of sugar alcohols as PCM for thermal energy storage. Sol Energ Mat Sol C 126: 125–134. doi: 10.1016/j.solmat.2014.03.020
    [12] Tournier R (2011) Thermodynamic origin of the vitreous transition. Materials 4: 869 –892. doi: 10.3390/ma4050869
    [13] Coultate TP (2002) Sugars, In: Food, the chemistry of its component. 4th Ed, Royal Society of Chemistry, Cambridge (UK), 30–32.
    [14] Tomasik P, Palasinski M, Wiejak S (1989) The thermal de composition of carbohydrates. Part I. The decomposition of mono-,di-, and oligo-saccharides, In: R.S. Tipson, D. Horton (Eds), Advances in carbohydrate chemistry and biochemistry, Vol 47, Academic Press Inc., 203–278.
    [15] Tong B, Liu RB, Meng CG, et al. (2010) Heat capacities and nonisothermal thermal decomposition reaction kinetics of D-mannitol. J Chem Eng Data 55: 119–124. doi: 10.1021/je900285w
    [16] Anastasakis K, Ross AB, Jones JM (2011) Pyrolysis behaviour of the main carbohydrates of brown macro-algae. Fuel 90: 598–607. doi: 10.1016/j.fuel.2010.09.023
    [17] Sagara A, Nomura T, Tsubota M, et al. (2014) Improvement in thermal endurance of D-mannitol as phase change material (PCM) by impregnation into nanopores. Mater ChemPhys 146: 253–260.
    [18] Šimon P (2011) Forty years of the Šesták-Berggren equation. ThermochimActa 520: 156–157. doi: 10.1016/j.tca.2011.03.030
    [19] Yamaguchi A, Sato O, Mimura N, et al. (2014) Intramolecular dehydration of mannitol in high-temperature liquid water without acid catalyst.RSC Adv 4: 45575–45578.
    [20] Lee JW, Thomas LC, Jerrel J, et al. (2011) Schmidt, investigation of the thermal decomposition as the kinetic process that causes the loss of crystalline structure of sucrose using chemical analysis approach (Part II). J Agr Food Chem 59: 702–712. doi: 10.1021/jf104235d
    [21] Wu CB, Wu G, Yang S, et al. (2014) Preparation of mannitol@silica core-shell capsules via an interfacial polymerization process from water–in–oil emulsion. Colloid Surface A 457: 487–494. doi: 10.1016/j.colsurfa.2014.06.018
    [22] Rodríguez-García MM, Bayón R, Rojas R (2016) Stability of D-mannitol upon melting/freezing cycles under controlled inert atmosphere. Energ Procedia 91: 218–225. doi: 10.1016/j.egypro.2016.06.207
    [23] Cunningham M, Dorée C (1917) Contributions to the Chemistry of Caramel. Payt I. Caramelan. J Chem Soc Trans 111: 589–608.
    [24] Jiang B, Liu Y, Bhandari B, et al. (2008) Impact of caramelization on the glass transition temperature of several caramelized sugars. Part I: chemical analyses. J Agr Food Chem 56: 5138–5147.
    [25] Singh F, Dean GR, Cantor SM (1948) The role of 5-(hydroxymethyl)-furfural in the discoloration of sugar solutions. J Am Chem Soc 70: 517–522. doi: 10.1021/ja01182a026
    [26] Miller RE, Cantor SM (1952) 2-hydroxyacetilfuran from sugars. J Am Chem Soc 74 (20): 5236–5237.
    [27] Vis-UV spectrum of 4-methylpent-3-en-2-one (CAS-141-79-7). NIST Chemistry WebBook. Available from: http://webbook.nist.gov/chemistry, 2017.
    [28] Oxidation of alcohols. Available from: http://www.chemguide.co.uk/organicprops/ alcohols/ oxidation.html, 2017.
    [29] Alcohol oxidation. Available from: https://en.wikipedia.org/wiki/Alcohol_oxidation, 2017.
    [30] Infrared spectra of trans-2-hexenal (CAS-6728-26-3); trans-2-methyl-2-butenal (CAS-497-03-0); 4-methylpent-3-en-2-one (CAS-141-79-7). NIST Chemistry WebBook. Available from: http://webbook.nist.gov/chemistry, 2017.
  • Reader Comments
  • © 2017 the Author(s), licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0)
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Metrics

Article views(6519) PDF downloads(1364) Cited by(23)

Article outline

Figures and Tables

Figures(12)

Other Articles By Authors

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return

Catalog