Research article Special Issues

Molten salt pyrolysis of milled beech wood using an electrostatic precipitator for oil collection

  • Received: 19 May 2015 Accepted: 15 July 2015 Published: 22 July 2015
  • A tubular electrostatic precipitator (ESP) was designed and tested for collection of pyrolysis oil in molten salt pyrolysis of milled beech wood (0.5-2 mm). The voltage-current (V-I) characteristics were studied, showing most stable performance of the ESP when N2 was utilized as inert gas. The pyrolysis experiments were carried out in FLiNaK and (LiNaK)2CO3 over the temperature range of 450-600 ℃. The highest yields of pyrolysis oil were achieved in FLiNaK, with a maximum of 34.2 wt% at 500 ℃, followed by a decrease with increasing reactor temperature. The temperature had nearly no effect on the oil yield for pyrolysis in (LiNaK)2CO3 (19.0-22.5 wt%). Possible hydration reactions and formation of HF gas during FLiNaK pyrolysis were investigated by simulations (HSC Chemistry software) and measurements of the outlet gas (FTIR), but no significant amounts of HF were detected.

    Citation: Heidi S. Nygård, Espen Olsen. Molten salt pyrolysis of milled beech wood using an electrostatic precipitator for oil collection[J]. AIMS Energy, 2015, 3(3): 284-296. doi: 10.3934/energy.2015.3.284

    Related Papers:

  • A tubular electrostatic precipitator (ESP) was designed and tested for collection of pyrolysis oil in molten salt pyrolysis of milled beech wood (0.5-2 mm). The voltage-current (V-I) characteristics were studied, showing most stable performance of the ESP when N2 was utilized as inert gas. The pyrolysis experiments were carried out in FLiNaK and (LiNaK)2CO3 over the temperature range of 450-600 ℃. The highest yields of pyrolysis oil were achieved in FLiNaK, with a maximum of 34.2 wt% at 500 ℃, followed by a decrease with increasing reactor temperature. The temperature had nearly no effect on the oil yield for pyrolysis in (LiNaK)2CO3 (19.0-22.5 wt%). Possible hydration reactions and formation of HF gas during FLiNaK pyrolysis were investigated by simulations (HSC Chemistry software) and measurements of the outlet gas (FTIR), but no significant amounts of HF were detected.


    加载中
    [1] Bridgwater AV (2012) Review of fast pyrolysis of biomass and product upgrading. Biomass Bioenerg 38: 68-94. doi: 10.1016/j.biombioe.2011.01.048
    [2] Venderbosch RH, Prins W (2010) Fast pyrolysis technology development. Biofuel Bioprod Bior 4: 178-208. doi: 10.1002/bbb.205
    [3] Lovering DG (1982) Molten salt technology. California, USA: Plenum Press. 533.
    [4] Jiang H, Ai N, Wang M, et al. (2009) Experimental Study on Thermal Pyrolysis of Biomass in Molten Salt Media. Electrochemistry 77: 730-735. doi: 10.5796/electrochemistry.77.730
    [5] Adinberg R, Epstein M, Karni J (2004) Solar Gasification of Biomass: A Molten Salt Pyrolysis Study. J Sol Energ Eng 126: 850-857. doi: 10.1115/1.1753577
    [6] Hathaway BJ, Davidson JH, Kittelson DB (2011) Solar Gasification of Biomass: Kinetics of Pyrolysis and Steam Gasification in Molten Salt. J Sol Energ Eng 133: 021011. doi: 10.1115/1.4003680
    [7] Sada E, Kumazawa H, Kudsy M (1992) Pyrolysis of lignins in molten salt media. Ind Eng Chem Res 31: 612-616. doi: 10.1021/ie00002a025
    [8] Kudsy M, Kumazawa H, Sada E (1995) Pyrolysis of kraft lignin in molten ZNCL2-KCL media with tetralin vapor addition. Can J Chem Eng 73: 411-415. doi: 10.1002/cjce.5450730319
    [9] Hammond V, Mudge L (1975) Feasibility study of use of molten salt technology for pyrolysis of solid waste. Richland, Washington, USA: Battele Pacific Northwest Labs. EPA-670/2-75-014 EPA-670/2-75-014.
    [10] Iwaki H, Ye S, Katagiri H, et al. (2004) Wastepaper gasification with CO2 or steam using catalysts of molten carbonates. Appl Catal A: Gen 270: 237-243. doi: 10.1016/j.apcata.2004.05.010
    [11] Jin G, Iwaki H, Arai N, et al. (2005) Study on the gasification of wastepaper/carbon dioxide catalyzed by molten carbonate salts. Energy 30: 1192-1203. doi: 10.1016/j.energy.2004.08.002
    [12] Menzel J, Perkow H, Sinn H (1973) Recycling plastics. Chem Ind 570-573.
    [13] Bertolini GE, Fontaine J (1987) Value recovery from plastics waste by pyrolysis in molten salts. Conserv Recy 10: 331-343. doi: 10.1016/0361-3658(87)90064-6
    [14] Chambers C, Larsen JW, Li W, et al. (1984) Polymer waste reclamation by pyrolysis in molten salts. Ind Eng Chem Proc Des Dev 23: 648-654.
    [15] Williams D (2006) Assessment of candidate molten salt coolants for the NGNP/NHI heat-transfer loop. Oak Ridge, Tennessee, USA: Oak Ridge National Laboratory.
    [16] Bridgwater AV, Peacocke GVC (2000) Fast pyrolysis processes for biomass. Renew Sust Energ Rev 4: 1-73. doi: 10.1016/S1364-0321(99)00007-6
    [17] Oasmaa A, Peacocke C (2010) Properties and fuel use of biomass-derived fast pyrolysis liquids. VTT Publications: Finland 731: 79.
    [18] Mochizuki T, Toba M, Yoshimura Y (2013) Effect of Electrostatic Precipitator on COllection Efficiency of Bio-oil in Fast Pyrolysis of Biomass. J Jpn Petrol Inst 56: 401-405. doi: 10.1627/jpi.56.401
    [19] Bedmutha RJ, Ferrante L, Briens C, et al. (2009) Single and two-stage electrostatic demisters for biomass pyrolysis application. Chem Eng Proc: Proc Intens 48: 1112-1120. doi: 10.1016/j.cep.2009.02.007
    [20] Nygård HS, Olsen E (2012) Review of thermal processing of biomass and waste in molten salts for production of renewable fuels and chemicals. Int J Low-Carbon Technol: ctr045.
    [21] Nygård HS, Danielsen F, Olsen E (2012) Thermal History of Wood Particles in Molten Salt Pyrolysis. Energ Fuels 26: 6419-6425. doi: 10.1021/ef301121j
    [22] Di Blasi C, Branca C (2003) Temperatures of Wood Particles in a Hot Sand Bed Fluidized by Nitrogen. Energ Fuels 17: 247-254. doi: 10.1021/ef020146e
    [23] Nygård HS, Olsen E (2014) Effect of Salt Composition and Temperature on the Thermal Behavior of Beech Wood in Molten Salt Pyrolysis. Energ Procedia 58: 221-228. doi: 10.1016/j.egypro.2014.10.432
    [24] Lüftl S, Visakh P, Chandran S (2014) Polyoxymethylene Handbook: Structure, Properties, Applications and Their Nanocomposites. New Jersey, USA: John Wiley & Sons.
    [25] Lucas JR (2001) High voltage engineering. Colombo, Open University of Sri Lanka 64-89.
    [26] Huheey JE, Keiter EA, Keiter RL, et al. (2006) Inorganic Chemistry: Principles of Structure and Reactivity. Delhi, India: Pearson Education, 808.
    [27] Klas M, Radmilović-Radjenović M, Radjenović B, et al. (2012) Transport parameters and breakdown voltage characteristics of the dry air and its constituents. Nucl Instrum Meth B: 279: 96-99. doi: 10.1016/j.nimb.2011.10.045
    [28] Grønli MG (1996) A theoretical and experimental study of the thermal degradation of biomass [Doctoral thesis]. Trondheim, Norway: The Norwegian University of Science and Technology. 282 .
    [29] Hathaway BJ, Davidson JH, Kittelson DB (2011) Solar Gasification of Biomass: Kinetics of Pyrolysis and Steam Gasification in Molten Salt. J Sol Energ Eng 133: 021011-021011. doi: 10.1115/1.4003680
    [30] Olson LC, Ambrosek JW, Sridharan K, et al. (2009) Materials corrosion in molten LiF-NaF-KF salt. J Fluorine Chem 130: 67-73. doi: 10.1016/j.jfluchem.2008.05.008
    [31] Hoekstra E, Hogendoorn KJ, Wang X, et al. (2009) Fast pyrolysis of biomass in a fluidized bed reactor: in situ filtering of the vapors. Ind Eng Chem Res 48: 4744-4756. doi: 10.1021/ie8017274
    [32] Basu P (2013) Biomass Gasification, Pyrolysis and Torrefaction: Practical Design and Theory. San Diego, USA: Elsevier Science 552.
    [33] Kersten S, Garcia-Perez M (2013) Recent developments in fast pyrolysis of ligno-cellulosic materials. Curr Opin Biotech 24: 414-420. doi: 10.1016/j.copbio.2013.04.003
    [34] Wang Z, McDonald AG, Westerhof RJ, et al. (2013) Effect of cellulose crystallinity on the formation of a liquid intermediate and on product distribution during pyrolysis. J Anal Appl Pyrol 100: 56-66. doi: 10.1016/j.jaap.2012.11.017
    [35] Zhou S, Pecha B, van Kuppevelt M, et al. (2014) Slow and fast pyrolysis of Douglas-fir lignin: Importance of liquid-intermediate formation on the distribution of products. Biomass Bioenerg 66: 398-409. doi: 10.1016/j.biombioe.2014.03.064
    [36] Boroson ML (1987) Secondary reactions of tars from pyrolysis of sweet gum hardwood [Doctoral thesis]: Massachusetts Institute of Technology.
    [37] Dauenhauer PJ, Colby JL, Balonek CM, et al. (2009) Reactive boiling of cellulose for integrated catalysis through an intermediate liquid. Green Chem 11: 1555-1561. doi: 10.1039/b915068b
    [38] Wang X, Kersten SRA, Prins W, et al. (2005) Biomass Pyrolysis in a Fluidized Bed Reactor. Part 2: Experimental Validation of Model Results. Ind Eng Chem Res 44: 8786-8795.
    [39] Scott DS, Majerski P, Piskorz J, et al. (1999) A second look at fast pyrolysis of biomass—the RTI process. J Anal Appl Pyrol 51: 23-37. doi: 10.1016/S0165-2370(99)00006-6
    [40] Hoekstra E, Westerhof RJM, Brilman W, et al. (2012) Heterogeneous and homogeneous reactions of pyrolysis vapors from pine wood. AIChE J 58: 2830-2842. doi: 10.1002/aic.12799
    [41] Ouyang F-Y, Chang C-H, Kai J-J (2014) Long-term corrosion behaviors of Hastelloy-N and Hastelloy-B3 in moisture-containing molten FLiNaK salt environments. J Nucl Mater 446: 81-89. doi: 10.1016/j.jnucmat.2013.11.045
    [42] Roine A, Lamberg P, Mansikka-aho J, et al. (2006) HSC Chemistry 6.12. Helsinki, Finland: Outotec Research Oy.
  • Reader Comments
  • © 2015 the Author(s), licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0)
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Metrics

Article views(6628) PDF downloads(1127) Cited by(7)

Article outline

Figures and Tables

Figures(6)  /  Tables(1)

Other Articles By Authors

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return

Catalog