Research article Special Issues

Optical environmental sensing in wireless smart meter network

  • Received: 11 July 2018 Accepted: 04 October 2018 Published: 12 October 2018
  • In recent years, the traditional power grid is undergoing a profound revolution due to the advent and development of smart grid. Many hard and challenging issues of the traditional grid such as high maintenance costs, poor scalability, low efficiency, and stability can be effectively handled and solve in the wireless smart grid (WSG) by utilizing the modern wireless sensor technology. In a WSG, data are collected by sensors at first and then transmitted to the base station through the wireless network. The control centre is responsible for taking actions based on this received data. Traditional sensors are failing to provide accurate and reliable data in WSG, and optical fiber based sensor are emerging as an obvious choice due to the advancement of optical fiber sensing technology, accuracy, and reliability. This paper presents a WSG platform integrated with optic fiber-based sensors for real-time monitoring. To demonstrate the validity of the concept, fresh water sensing of refractive index (RI) was first experimented with an optical fiber sensor. The sensing mechanism functions with the reflectance at the fiber’s interface where reflected spectra’s intensity is registered corresponding to the change of RI in the ambient environment. The achieved sensitivity of the fabricated fiber sensor is 29.3 dB/RIU within the 1.33–1.46 RI range. An interface between the measured optical spectra and the WSG is proposed and demonstrated, and the data acquired is transmitted through a network of wireless smart meters.

    Citation: Minglong Zhang, Iek Cheong Lam, Arun Kumar, Kin Kee Chow, Peter Han Joo Chong. Optical environmental sensing in wireless smart meter network[J]. AIMS Electronics and Electrical Engineering, 2018, 2(3): 103-116. doi: 10.3934/ElectrEng.2018.3.103

    Related Papers:

  • In recent years, the traditional power grid is undergoing a profound revolution due to the advent and development of smart grid. Many hard and challenging issues of the traditional grid such as high maintenance costs, poor scalability, low efficiency, and stability can be effectively handled and solve in the wireless smart grid (WSG) by utilizing the modern wireless sensor technology. In a WSG, data are collected by sensors at first and then transmitted to the base station through the wireless network. The control centre is responsible for taking actions based on this received data. Traditional sensors are failing to provide accurate and reliable data in WSG, and optical fiber based sensor are emerging as an obvious choice due to the advancement of optical fiber sensing technology, accuracy, and reliability. This paper presents a WSG platform integrated with optic fiber-based sensors for real-time monitoring. To demonstrate the validity of the concept, fresh water sensing of refractive index (RI) was first experimented with an optical fiber sensor. The sensing mechanism functions with the reflectance at the fiber’s interface where reflected spectra’s intensity is registered corresponding to the change of RI in the ambient environment. The achieved sensitivity of the fabricated fiber sensor is 29.3 dB/RIU within the 1.33–1.46 RI range. An interface between the measured optical spectra and the WSG is proposed and demonstrated, and the data acquired is transmitted through a network of wireless smart meters.


    加载中
    [1] Mahmood A, Javaid N and Razzaq S (2015) A review of wireless communications for smart grid. Renew Sust Energ Rev 41: 248–260. doi: 10.1016/j.rser.2014.08.036
    [2] Yick J, Mukherjee B, Ghosal D (2008) Wireless sensor network survey. Comput Netw 52: 2292–2330. doi: 10.1016/j.comnet.2008.04.002
    [3] Pakzad SN, Fenves GL, Kim S, et al. (2008) Design and Implementation of Scalable Wireless Sensor Network for Structural Monitoring. J Infrastruct Syst 14: 89–101. doi: 10.1061/(ASCE)1076-0342(2008)14:1(89)
    [4] Li X, Cheng X, Yan K, et al. (2010) A Monitoring System for Vegetable Greenhouses based on a Wireless Sensor Network. Sensors 10: 8963–8980. doi: 10.3390/s101008963
    [5] Yeo TL, Sun T, Grattan KTV (2008) Fiber-optic sensor technologies for humidity and moisture measurement. Sensor Actuat A-Phys 144: 280–295. doi: 10.1016/j.sna.2008.01.017
    [6] Culshaw B (2004) Optical Fiber Sensor Technologies: Opportunities and Perhaps Pitfalls. J Lightwave Technol 22: 39–50. doi: 10.1109/JLT.2003.822139
    [7] O'Connell E, Healy M, OKeeffe S, et al. (2013) A Mote Interface for Fiber Optic Spectral Sensing With Real-Time Monitoring of the Marine Environment. IEEE Sens J 13: 2619–2625.
    [8] Lloyd SW, Newman JA, Wilding DR, et al. (2007) Compact optical fiber sensor smart node. Rev Sci Instrum 78: 35108. doi: 10.1063/1.2715994
    [9] Kuang KSC, Quek ST, Maalej M (2008) Remote flood monitoring system based on plastic optical fibers and wireless motes. Sensor Actuat A-Phys 147: 449–455.
    [10] Pang C, Yu M, Zhang XM, et al. (2012) Multifunctional optical MEMS sensor platform with heterogeneous fiber optic Fabry–Pérot sensors for wireless sensor networks. Sensor Actuat A-Phys 188: 471–480. doi: 10.1016/j.sna.2012.03.016
    [11] Tan YC, Ji WB, Mamidala V, et al. (2014) Carbon-nanotube-deposited long period fiber grating for continuous refractive index sensor applications. Sensor Actuat B-Chem 196: 260–264.
    [12] Tan YC, Tou ZQ, Mamidala V, et al. (2014) Continuous refractive index sensing based on carbon-nanotube-deposited photonic crystal fibers. Sensor Actuat B-Chem 202: 1097–1102.
    [13] Tan YC, Tou ZQ, Chow KK, et al. (2015) Graphene-deposited photonic crystal fibers for continuous refractive index sensing applications. Opt Express 23: 31286–31294. doi: 10.1364/OE.23.031286
    [14] Nicholson JW, Windeler RS, DiGiovanni DJ (2007) Optically driven deposition of single-walled carbon-nanotube saturable absorbers on optical fiber end-faces. Opt Express 15: 9176–9183. doi: 10.1364/OE.15.009176
    [15] Kashiwagi K, Yamashita S, Set SY (2009) In-situ monitoring of optical deposition of carbon nanotubes onto fiber end. Opt Express 17: 5711–5715.
    [16] Yamashita S (2012) A Tutorial on Nonlinear Photonic Applications of Carbon Nanotube and Graphene. J Lightwave Technol 30: 427–447. doi: 10.1109/JLT.2011.2172574
    [17] Lee H, Shaker G, Naishadham K, et al. (2011) Carbon-nanotube loaded antenna-based ammonia gas sensor. IEEE T Microw Theory 59: 2665–2673.
    [18] Kruss S, Hilmer AJ, Zhang JQ, et al. (2013) Carbon nanotubes as optical biomedical sensors. Adv Drug Deliver Rev 65: 1933–1950. doi: 10.1016/j.addr.2013.07.015
    [19] The Network Simulator tool: ns-3. Available from: https://www.nsnam.org/.
  • Reader Comments
  • © 2018 the Author(s), licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0)
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Metrics

Article views(3292) PDF downloads(979) Cited by(1)

Article outline

Figures and Tables

Figures(10)  /  Tables(1)

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return

Catalog