Research article Topical Sections

Assessing the static behavior of hybrid CNT-metal-ceramic composite plates

  • Received: 19 May 2016 Accepted: 03 July 2016 Published: 05 July 2016
  • Functionally graded materials are commonly particulate composites characterized by a varying spatial distribution of the inclusion particles. Because of this, these materials possess a great suitability potential concerning to material properties, which can be very useful to achieve specified structural behaviors. Significant features of these materials are related to their thermal barrier properties especially when ceramic materials are involved, and to the mitigation of abrupt stresses transitions, typically found in laminates. From the manufacturing point of view as well as from the computational perspective, these materials can be thought as effectively having a continuous variation of their constituent phases and consequently their properties, or by resulting from the stacking of a specified number of layers, each having constant properties. This work presents a set of parametric studies aiming to characterize the static response of hybrid functionally graded plates, concerning to their transverse displacement profile and stresses distributions. To this purpose, one considers parameters such as different ceramic materials, plates’ aspect ratio, continuous or discrete variation of phase’s mixture through thickness, the carbon nanotubes (CNT) weight fraction contents and the type of nanotubes. The results obtained are discussed and conclusions are drawn.

    Citation: D. M. S. Costa, M. A. R. Loja. Assessing the static behavior of hybrid CNT-metal-ceramic composite plates[J]. AIMS Materials Science, 2016, 3(3): 808-831. doi: 10.3934/matersci.2016.3.808

    Related Papers:

  • Functionally graded materials are commonly particulate composites characterized by a varying spatial distribution of the inclusion particles. Because of this, these materials possess a great suitability potential concerning to material properties, which can be very useful to achieve specified structural behaviors. Significant features of these materials are related to their thermal barrier properties especially when ceramic materials are involved, and to the mitigation of abrupt stresses transitions, typically found in laminates. From the manufacturing point of view as well as from the computational perspective, these materials can be thought as effectively having a continuous variation of their constituent phases and consequently their properties, or by resulting from the stacking of a specified number of layers, each having constant properties. This work presents a set of parametric studies aiming to characterize the static response of hybrid functionally graded plates, concerning to their transverse displacement profile and stresses distributions. To this purpose, one considers parameters such as different ceramic materials, plates’ aspect ratio, continuous or discrete variation of phase’s mixture through thickness, the carbon nanotubes (CNT) weight fraction contents and the type of nanotubes. The results obtained are discussed and conclusions are drawn.


    加载中
    [1] Zok FW, Levi CG (2001) Mechanical Properties of Porous-Matrix Ceramic Composites. Adv Eng Mater 3: 15-23.
    [2] Ramakrishna S, Mayer J, Wintermantel E, et al. (2001) Biomedical applications of polymer-composite materials: a review. Compos Sci Technol 61: 1189-1224. doi: 10.1016/S0266-3538(00)00241-4
    [3] Hussain F, Hojjati M, Okamoto M, et al. (2006) Polymer-matrix Nanocomposites, Processing, Manufacturing, and Application: An Overview. J Compos Mater 40: 1511-1575. doi: 10.1177/0021998306067321
    [4] Esawi AMK, Morsi K, Sayed A, et al. (2010) Effect of carbon nanotube (CNT) content on the mechanical properties of CNT-reinforced aluminium composites. Compos Sci Technol 70: 2237-2241. doi: 10.1016/j.compscitech.2010.05.004
    [5] Neubauer E, Kitzmantel M, Hulman M, et al. (2010) Potential and challenges of metal-matrix-composites reinforced with carbon nanofibers and carbon nanotubes. Compos Sci Technol 70: 2228-2236. doi: 10.1016/j.compscitech.2010.09.003
    [6] Metal Matrix Composites: Materials, Manufacturing and Engineering. Edited by J. Paulo Davim. Walter de Gruyter GmbH, Berlin/Munich/Boston (2014).
    [7] Miyamoto Y, Kaysser WA, Rabin BH, et al. (1999) Functionally graded materials: design, processing and applications. Springer, New York.
    [8] Birman V, Byrd LW (2007) Modeling and Analysis of Functionally Graded materials and Structures. Appl Mech Rev 60: 195-216. doi: 10.1115/1.2777164
    [9] Ferreira AJM, Batra RC, Roque CMC, et al. (2005) Static analysis of functionally graded plates using third-order shear deformation theory and a meshless method. Compos Struct 69: 449-457. doi: 10.1016/j.compstruct.2004.08.003
    [10] Qian LF, Batra RC, Chen LM (2004) Static and dynamic deformations of thick functionally graded elastic plates by using higher-order shear and normal deformable plate theory and meshless local Petrov-Galerkin method. Compos Part B 35: 685-697 doi: 10.1016/j.compositesb.2004.02.004
    [11] Loja MAR, Barbosa JI, Mota Soares CM (2012) A Study on the Modeling of Sandwich Functionally Graded Particulate Composites. Compos Struct 94: 2209-2217. doi: 10.1016/j.compstruct.2012.02.015
    [12] Tornabene F, Fantuzzi N, Bacciocchi M (2014) Free vibrations of free-form doubly-curved shells made of functionally graded materials using higher-order equivalent single layer theories. Compos Part B 67: 490-509. doi: 10.1016/j.compositesb.2014.08.012
    [13] Viola E, Rossetti L, Fantuzzi N, et al. (2014) Static analysis of functionally graded conical shells and panels using the generalized unconstrained third order theory coupled with the stress recovery. Compos Struct 112: 44-65. doi: 10.1016/j.compstruct.2014.01.039
    [14] Loja MAR, Barbosa JI, Mota Soares CM (2015) Analysis of Sandwich Beam Structures Using Kriging Based Higher Order Models. Compos Struct 119: 99-106. doi: 10.1016/j.compstruct.2014.08.019
    [15] Fazzolari F (2015) Natural frequencies and critical temperatures of functionally graded sandwich plates subjected to uniform and non-uniform temperature distributions. Compos Struct 121: 197-210. doi: 10.1016/j.compstruct.2014.10.039
    [16] Thostenson ET, Li C, Chou T-W (2005) Review: Nanocomposites in context. Compos Sci Technol 65: 491-516. doi: 10.1016/j.compscitech.2004.11.003
    [17] Zapata-Solvas E, Gómez-García D, Domínguez-Rodríguez A (2012) Towards physical properties tailoring of carbon nanotubes-reinforced ceramic matrix composites. J Eur Ceram Soc 32: 3001-3020. doi: 10.1016/j.jeurceramsoc.2012.04.018
    [18] Coleman JN, Khan U, Blau WJ, et al. (2006) Small but strong: A review of the mechanical properties of carbon nanotube-polymer composites. Carbon 44: 1624-1652. doi: 10.1016/j.carbon.2006.02.038
    [19] Kuilla T, Bhadra S, Yao D, et al. (2010) Recent advances in graphene based polymer composites. Prog Polym Sci 35: 1350-1375. doi: 10.1016/j.progpolymsci.2010.07.005
    [20] Du J-H, Bai J, Cheng H-M (2007) The present status and key problems of carbon nanotube based polymer composites. eXPRESS Polym Lett 1: 253-273. doi: 10.3144/expresspolymlett.2007.39
    [21] Kim M, Park Y-B, Okoli OI, et al. (2009) Processing, characterization, and modeling of carbon nanotube-reinforced multiscale composites. Compos Sci Technol 69: 335-342. doi: 10.1016/j.compscitech.2008.10.019
    [22] Hu Y, Shenderova OA, Hu Z, et al. (2006) Carbon nanostructures for advanced composites. Rep Prog Phys 69: 1847-1895.
    [23] Ajayan PM, Schadler LS, Giannaris C, et al. (2000) Single-walled carbon nanotube-polymer composites: Strength and weakness. Adv Mater 12: 750.
    [24] Salvetat JP, Briggs GAD, Bonard JM, et al. (1999) Elastic and Shear Moduli of Single-Walled Carbon Nanotube Ropes. Phys Rev Lett 82: 944. doi: 10.1103/PhysRevLett.82.944
    [25] Liew KM, Wong CH, Tan MJ (2006) Tensile and compressive properties of carbon nanotube bundles. Acta Mater 54: 225-231. doi: 10.1016/j.actamat.2005.09.002
    [26] Bartolucci SF, Paras J, Rafiee MA, et al. (2011) Graphene-aluminum nanocomposites. Mater Sci Eng A 528: 7933-7937. doi: 10.1016/j.msea.2011.07.043
    [27] Rashad M, Pan F, Hua H, et al. (2015) Enhanced tensile properties of magnesium composites reinforced with graphene nanoplatelets. Mater Sci Eng A 630: 36-44. doi: 10.1016/j.msea.2015.02.002
    [28] Rafiee M, He XQ, Mareishi S, et al. (2014) Modeling and stress analysis of smart cnts/fiber/polymer multiscale composite plates. Int J Appl Mech 6: 1450025. doi: 10.1142/S1758825114500252
    [29] Zhu P, Lei ZX, Liew KM (2012) Static and free vibration analyses of carbon nanotube-reinforced composite plates using finite element method with first order shear deformation plate theory. Compos Struct 94: 1450-1460. doi: 10.1016/j.compstruct.2011.11.010
    [30] Alibeigloo A, Liew KM (2013) Thermoelastic analysis of functionally graded carbon nanotube-reinforced composite plate using theory of elasticity. Compos Struct 106: 873-881. doi: 10.1016/j.compstruct.2013.07.002
    [31] Liew KM, Lei ZX, Zhang LW (2015) Mechanical analysis of functionally graded carbon nanotube reinforced composites: A review. Compos Struct 120: 90-97. doi: 10.1016/j.compstruct.2014.09.041
    [32] Tornabene F, Fantuzzi N, Bacciocchi M, et al. (2016) Effect of agglomeration on the natural frequencies of functionally graded carbon nanotube-reinforced laminated composite doubly curved shells. Compos Part B 89: 187-218. doi: 10.1016/j.compositesb.2015.11.016
    [33] Halpin JC, Kardos JL (1976) The Halpin-Tsai Equations: A Review. Polym Eng Sci 16: 344-352. doi: 10.1002/pen.760160512
    [34] Suhr J, Koratkar N, Keblinski P, et al. (2005) Viscoelasticity in carbon nanotube composites. Nat Mater 4: 134. doi: 10.1038/nmat1293
    [35] Sinnott SB (2002) Chemical functionalization of carbon nanotubes: a review. J Nanosci Nanotechnol 2: 113. doi: 10.1166/jnn.2002.107
    [36] Balasubramanian K, Burghard M (2005) Chemically functionalized carbon nanotubes. Nano Micro Small 1: 180-192.
    [37] Ma P-C, Siddiqui NA, Marom G, et al. (2010) Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: A review. Compos Part A 41: 1345-1367. doi: 10.1016/j.compositesa.2010.07.003
    [38] Reddy JN (2004) Mechanics of Laminated Composite Plates and Shells: Theory and Analysis, 2nd ed., CRC Press.
    [39] Abu Al-Rub RK, Tyson BM, Yazdanbakhsh A (2012) On the aspect ratio effect of multi-walled carbon nanotube reinforcements on the mechanical properties of cementitious nanocomposites. Constr Build Mater 35: 647-655. doi: 10.1016/j.conbuildmat.2012.04.086
    [40] U.S. Research Nanomaterials Inc. Available from: (http://www.us-nano.com/inc/sdetail/215, 21 June 2016, 17:38 GMT).
  • Reader Comments
  • © 2016 the Author(s), licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0)
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Metrics

Article views(4553) PDF downloads(1243) Cited by(6)

Article outline

Figures and Tables

Figures(9)  /  Tables(25)

Other Articles By Authors

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return

Catalog